Services on Demand
Article
Indicators
Related links
-
Cited by Google
-
Similars in Google
Share
South African Journal of Science
On-line version ISSN 1996-7489
Print version ISSN 0038-2353
S. Afr. j. sci. vol.119 n.1-2 Pretoria Jan./Feb. 2023
http://dx.doi.org/10.17159/sajs.2023/11657
REVIEW ARTICLE
Current situation and future prognosis of health, safety and environment risk assessment of nanomaterials in South Africa
Mary GulumianI, II; Melusi ThwalaIII, IV, *; Xolani MakhobaV; Victor We penerII
IHaematologyand Molecular Medicine Department, University ol the Witwatersrand, Johannesburg South Africa
IIWater Research Group, Unit lor Environmental Sciences and Management, North-West University Potchefstroom, South Africa
IIIWater Centre. Council for Scientific and Industrial Research, Pretoria, South Africa
IVCentre for Environmental Management, University of Free State, Bloemfontein, South Africa
VEmerging Research Areas Directorate, National Department of Science and Innovation, Pretoria, South Africa
ABSTRACT
The commercialisation and everyday use of nanomaterials and nanomaterial-enabled products (NEPs) is rising year-on-year. Responsible development of nanotechnology includes understanding their potential implications on health, safety, and the environment (HSE). The health risk assessment of nanomaterials has therefore become one of the major activities of international agencies Including the Organisation for Economic Co-operation and Development and the Environmental Protection Agency for protection of human health and the environment. Nationally, with the foresight and the leadership of the Department of Science and Innovation, a HSE programme was Initiated to establish the necessary Infrastructure to conduct the tests In the hazard Identification and exposure assessment that are needed In the risk assessment of nanomaterials synthesised as well as NEPs available in South Africa. Here we present the advances that have been made In elucidating the different facets that are required when undertaking risk assessments of nanomaterials, i.e. physlcochemical characterisation, hazard Identification, exposure assessment and effects assessment. These facets are increasingly being considered throughout the nanomaterials present In the life cycles of NEPs. South Africa's research contribution to an International understanding of HSE risks of nanomaterials is highlighted and the future direction to generate the necessary Information for effective risk communication and management Is provided. This will assist In ensuring safer Innovation of nanotechnology in South Africa and support the export of locally manufactured nanomaterials as per International requirements.
SIGNIFICANCE:
Significant contributions of South Africa to the nanomaterial HSE knowledge base are highlighted.
Development of standardised testing methodologies in nanomaterial HSE and protection of human and ecological health through risk assessment of nanomaterials are discussed.
This paper contributes to ensuring safer innovation of nanotechnology in South Africa.
Background
Nanomaterials are defined as "material with any external dimension in the nanoscale or having an internal structure or surface structure in the nanoscale"1. For new commercial nanomaterials (and respective applications) and nanomaterial-enabled products (NEPs), risk assessments are required to provide science-based information to predict or estimate risk associated with exposure. We anticipate that the health risk assessment of nanomaterials and NEPs will follow the traditional risk assessment paradigm for chemicals involving hazard identification, dose-response assessment, exposure assessment and risk characterisation.2 A similar approach was proposed for the health risk assessment of nanomaterials to include the identification of their physicochemical properties, the assessment of their hazard and dose-response relationship, and the determination of exposure (occupational, consumer, environment), to facilitate robust and efficient evaluation of their associated risks during their entire life cycle. The health risk assessment of nanomaterials has therefore become one of the major activities globally to develop standardised testing procedures led by the Organisation for Economic Cooperation and Development (OECD).3 Moreover, international initiatives such as the US National Nanotechnology Initiative Research Strategy4 and the European Commission5 were established to ensure nanosafety in the United States of America and Europe.
The need for the development of a focused research strategy for health, safety and environment (HSE) aspects in support of the South African National Nanotechnology Strategy was realised and initial research areas were proposed.6 Gulumian and others7 pointed out that these research activities should not be undertaken in isolation and that internationally derived best practice guidelines should be adopted so that research could be focused specific to South Africa's requirements. To this end, the South African Department of Science and Innovation (DSI) established the Nanotechnology HSE Research Platform in 2015. It is within this platform that the bulk of the scientific information pertaining to Nano HSE, nationally, has been produced. This platform has enabled South Africa to establish and grow the necessary infrastructure required for the hazard identification and exposure assessment necessary in the risk assessment of nanomaterials or NEPs. The aim of this paper is therefore to describe the major contributions thus far by South Africa in the field of nanomaterial HSE, within the context of current international developments. We further evaluate the research needs in relation to national and international development needs in the field. It is anticipated that the achievements reached thus far and new directions identified will aid in the risk assessment, communication and management of nanomaterials and NEPs in South Africa.
Assessment of physicochemical properties
The physicochemical properties of nanomaterials determine their environmental fate and interaction with biological systems.7 8 Their significance became apparent with the recognition that small changes in these properties may influence environmental behaviour and subsequent biological uptake of nanomaterials. Nationally, the infrastructure to determine dissolution properties has been established9, and, internationally, contributions have been made to determine the biodurability and dissolution of nanomaterials10,11. For example, the dissolution of gold nanoparticles (AuNPs) has been determined in different biological and environmental media.12
Hazard identification
For hazard identification, it became crucial for international agencies to develop in vitro and in vivo assays that characterise acute and chronic toxicity.13 The OECD Working Party on Manufactured Nanomaterials therefore launched the Sponsorship Programme in November 2007 to standardise testing, with South Africa being the Lead Sponsor for the safety testing of AuNPs.13
Form vitro tests, South African research has demonstrated the interference of nanomaterials in optical read-out tests14 and has contributed to international development of an interference-free in vitro colony-forming ability test15. Moreover, researchers have recommended the use of label-free techniques to assess toxicity of nanomaterials16 and investigated their interference in genotoxicity and mutagenicity assays17 and with the RNA analyses18. More recently, research demonstrated the interference of AuNPs with in vitro endotoxin detection assays19 and provided guidance in the sterilisation of nanomaterials20 and proposed alternative testing strategies21. South Africa also contributed to elucidating the mechanism involved in the cellular uptake of AuNPs22,23 and in the mechanisms involved in the possible use of nanomaterials in nanomedicine24,25.
As for in vivo tests, the derivation of no observed adverse effect levels (NOAELs) requires sub-chronic (90 d) or long-term chronic (>2 years) studies. Due to ethical concerns, sub-acute (28 d)26 studies were suggested as an alternative to ensure sufficient recovery time following exposure. This revised 90-day OECD Test Guideline 41 327 further requires that retained lung burdens should be determined.
South Africa, in collaboration with leading international research groups, has conducted in vivo inhalation studies to assess the lung burden of high dissolution rate silver nanoparticles (AgNPs) and relatively lower dissolution rate AuNPs.28-31 Such collaborations also illustrated that the even lobar deposition of poorly soluble AuNPs and soluble AgNPs are similar28-30 and thus could propose the reduction of experimental animals to be used in the said 28-day inhalation toxicity and 90-day inhalation toxicity OECD guidelines. These inhalation studies also showed the size-dependent clearance from lungs after short-term inhalation exposure.32 South Africa further contributed to inhalation studies related to nano aerosol generation as part of the development of an international standard (ISO TR19601). Collaborative work was also conducted to investigate the tissue distribution of AuNPs and AgNPs after sub-acute intravenous co-administration of similarly sized counterparts33 as well as their effect on the blood biochemical and haematological parameters34.
With regard to ecological hazard assessment of nanomaterials, standardised toxicity testing methodologies and test organisms were initially utilised to understand the effects of exposure. Tests were carried out using traditional standardised aquatic test species (i.e. algae, macro-invertebrates and fish) to determine the hazards of, for example, double-walled carbon nanotubes35, induction of oxidative stress in the floating macrophyte Spirodela punctuta following exposure to AgNPs and zinc oxide (ZnO) nanoparticles36, and the mortality and behaviour effects of aluminium oxide and titanium dioxide (Ti02) to the early life stages of a freshwater snail (Physa acuta)37.
Subsequently, South African and other international researchers have been evaluating the applicability of standardised toxicity tests Counter alia nematodes38, enchytraeid potworms39, aquatic invertebrates and fish40,41. Using these standardised OECD protocols, local studies conducted as part of the safety testing of AuNPs revealed that nanomaterials had lower toxicity than their chemical equivalents.39-41 These and other South African studies on the three most commonly used toxicity bioassays - i.e. the 72-h algal growth inhibition test, 48-h Daphnia immobilisation test, and 96-h fish mortality test - contributed towards adaptations needed for nanomaterial toxicity testing. For example, CytoViva Dark field imaging was used41 to demonstrate that the disposal of surface-bound AuNPs by Daphnia occurs through increased moulting. Moreover, South Africa developed a standardised screening procedure to assess the hazard of nanomaterials in saline environments using brine shrimp (Artemia sp.)42 and proposed a new method to assess cell toxicity in real time using the xCELLigence real-time cell analyser to evaluate the effects of AuNPs and AgNPs to three different mammalian cells lines43.
As part of the call for further development of sub-lethal endpoints of chronic (long-term) exposure, Botha et al.44 used an integrated physiological response (i.e. swimming behaviour) in zebra fish (Danio rerio) that showed sub-lethal dose-response effects of AuNPs where gene expression and oxidative stress enzymes did not reveal any effects. The sensitivity of this endpoint was further demonstrated following exposure of D. rerio to sub-lethal concentrations of CdTe quantum dots and nanodiamonds45.
These different in vitro cell models and in vivo animal models described above, contribute to the techniques that are used in hazard assessment and regulation of nanoparticles before they are released into the market. This means that, for the safe development and commercialisation of nanotechnologies in South Africa, there are existing test systems that have successfully been validated and established to achieve the objectives for hazard assessment.
Assessment of exposure
Occupational exposure
Exposure to nanomaterials may occur directly through occupational and consumer exposure or indirectly through environmental exposure (Figure 1). There is thus the need for lifecycle risk assessment. The exposure assessment under the different scenarios critically requires that the nature and extent of contact with nanomaterials under different conditions and identified activities is determined. The identification of the routes of exposure such as inhalation, digestion, dermal or intravenous injection with dose and duration is also of great importance. The fact that nanomaterials come in various sizes, shapes, functionalities, concentrations, and chemical compositions must be borne in mind when undertaking exposure assessments.
Assessment of occupational exposure
Studies by the OECD and US National Institute for Occupational Safety and Health (NIOSH) provide guidance on strategies, techniques, and sampling protocols for determining nanomaterial concentrations in air. The three-tiered approach recommended by the OECD for occupational exposure assessment is as follows46:
Tier 1: On-site inspection and questionnaire to determine if the nanomaterials can be released from the processes/tasks.
Tier 2: Determine potential exposure in the workplace through screening and/or task specific measurements using the correct metrics (mass, number, surface area) with specialised online instrumentation. The establishment of background concentrations and levels in the personal breathing zone of the worker needs to be determined.
Tier 3: Tier 2 with concurrent particle sampling for offline analysis of particle morphology, mass or fibre concentration and chemical composition. These are related to particle control values in order to ascertain whether controls are sufficient or need to be improved.
Recommended exposure limits, another term for occupational exposure levels (OELs), for carbon nanotubes and nanofibres were determined to be 1 µg/m3 elemental carbon as a respirable mass 8-h time-weighted average concentration47 and for nano-Ti02 to be 0.3 mg/m3 as time-weighted average concentrations for up to 10 h per day during a40-h work week48. These recommended exposure limits have already been accepted by the US Occupational Safety and Health Administration (OSHA).49 The aforementioned examples demonstrate that there is advancement in deriving OELs for nanomaterials. However, with the rapid expansion of nanotechnology and development of new types of nanomaterials, the development of OELs in the workplace is lagging. Subsequently, for nanomaterials where no limit values are available, nano-reference values have been developed as provisional substitutes for health-based OELs or NOAELs. These nano-reference values are based on a precautionary approach and have been developed for four classes of nanomaterials: Class 1 - rigid, biopersistent nanofibre (e.g. carbon nanotubes, metal oxide fibres), Class 2 - biopersistent granular nanomaterials (e.g. Au, Fe, CoO), Class 3 - biopersistent granular and fibre nanomaterials (e.g. Ti02, ZnO, C60), Class 4 - non-persistent granular nanomaterials (e.g. fats, NaCI.50
Using the nano-reference values approach, South African researchers assessed exposure to AuNPs in a pilot scale facility where the measured nanoparticle emission was below the recommended nano-reference values.51 Using the tiered approach, exposure assessment was conducted in various research laboratories and in different industrial settings in South Africa to assess exposure to several types of nanomaterials utilising the established infrastructure. The values calculated from the measurements are used to calculate the 8-h time-weighted average exposure concentration to compare it to proposed OELs. Thereafter, proposed actions need to be taken to ensure the protection of workers, including engineering controls and personal protective equipment, to further minimise the risk of exposure.
Together with the identification of suitable biomarkers of internal exposure and indicators of toxicological responses52, it is also important to develop surveillance programmes to protect the workers dealing with nanomaterials53. To this end, South Africa contributed towards the development of World Health Organization guidelines to protect workers from potential risks of nanomaterials.54
Assessment of environmental exposure
Most of the information related to the fate and transport of nanomaterials in the environment has been obtained from modelling studies. These approaches were applied to quantify the levels of AgNPs and Ti02NPs in terrestrial and aquatic ecosystems from the cosmetics industry passing through wastewater treatment plants.55 Further studies were conducted on simulated wastewater treatment plants to determine the fate and effect of AgNPs and ZnONPs5657 and concluded that these materials predominantly remain in the sludge. Other studies found that aggregation and dissolution kinetics of aluminium oxide (Al203) and CuO nanoparticles were strongly influenced by source-specific physicochemical characteristics such as pH, natural organic matter and solutes.58 The latter physicochemical characteristics also influenced the toxicity of ZnO and iron oxide (FeOx) nanoparticles to the bacterium Bacillus subtilis.59
South African researchers conducted a comprehensive review of the existing approaches used to predict the bioaccumulation of nanomaterials. They concluded that the octanol-water partition coefficient (log Kow) may not be applicable but that kinetic models such as the physiologically based pharmacokinetic model showed the greatest promise in predicting bioaccumulation and biological exposure.60 South African researchers were further involved in a meta-analysis of existing nanomaterial bioaccumulation studies in fish to assess the bioaccumulation potential of nanomaterials.61 The authors found that a tiered approach that makes use of in vitro, in silica, ex vivo and, at the final tier, in vivo data shows promise as a new standardised protocol for nanomaterial bioaccumulation testing. It is currently being applied to assess CuO and quantum dots bioaccumulation in both terrestrial (i.e. earthworms) and aquatic (i.e. invertebrates and fish) organisms.
Assessment of exposure from consumer products
In terms of turnover, the pharmaceutical sector is currently the most important of the six considered nanotechnology markets, but all of them are expected to grow significantly in the future.62 The potential therefore exists for consumer and environmental exposure to nanomaterials present in NEPs at different product lifecycle phases, i.e. production, use, and end-of-life. Assessment of consumer exposure is therefore complex.63 An approach was developed to obtain sufficient quantities of materials (e.g. released from products, weathered fragmented products and sieved fragmented products) in order to study these nanomaterials during different lifecycle stages.64 Environmental exposure assessment due to release of nanomaterials has largely been dominated by pristine nanomaterial type, compared to those incorporated in NEPs.63 Because the functionalisation of nanomaterials into products alters their pristine state65, there are limitations in applying data obtained from pristine nanomaterials to elucidate exposure arising from the various lifecycle phases.
Prior to assessment of nanomaterials exposure in NEPs, it is important to establish the type of NEPs in the market. The global and local NEP markets are dominated by health and fitness products (e.g. sporting goods, active wear, personal care, and sunscreen products), being 42-81 % of the identified or examined NEPs.66 Hence the potential for environmental exposure to occur consistently and likely to increase with future demand for more superior products preferred by consumers. In South Africa, it has been illustrated that NEPs extend beyond the products that are declared by manufacturers.67 There is increased need for regional and ultimately global databases to enhance value to industry, consumers, researchers, and government authorities, and at a lower cost than the current country-specific registries.68
It is impractical, and in principle unnecessary, to analyse nanomaterial emissions from all NEPs; numerous studies have adopted a model that, at a lower tier, guides to priority emission-potential NEPs based on nanomaterials loci or fixation in the product.66 In brief, NEPs with nanomaterials suspended in liquid (e.g. shower gels, body creams), surface bound (e.g. toothbrush, fabrics), airborne (e.g. air conditioner) and suspended in solid gel (e.g. eye shadow, make-up sticks), exhibit elevated nanomaterials environmental exposure potential relative to counterparts where the nanomaterials are fixed in a solid matrix or nanostructured surface.
Overall, information pertaining to nanomaterials environmental exposure has greatly improved compared to a decade ago. Locally, studies have proposed priority groups of NEPs exhibiting considerable pollution potential55,66,69 as well as steps that enrich the information gap raised by authorities concerning emerging environmental pollutants70. Additionally, through platforms such as the Nanotechnology Industries Association, prioritisation of NEPs that raise HSE concerns have been highlighted.71 In the USA, the Food and Drug Administration has also set regulations pertaining to NEPs falling within food and drug classes.72 Whilst such examples highlight efforts to identify and minimise NEP cases of nanomaterial concern, many exposure dynamics remain poorly understood or complex, hence considerable challenges remain in the regulation of commercial items. Closer cooperation between authorities, industry, research, and public communities on nanomaterial HSE matters can enrich and advance the debate in this matter; South Africa still needs to enhance such a robust approach.
Application of models and/or in silico approaches
The aim of computational in silico approaches is to develop predictive models that can replace in vitro and in vivo testing for the purposes of human and ecological risk assessment of nanomaterials.
Computational approaches and the prediction of toxicity
This involves the development of computational models of nanomaterial structure property/activity relationships (QSAR) to predict toxicity of nanomaterials and then to assist in safety by design considerations. These studies done in conjunction with EU partners are aimed at identifying relevant response descriptors in relation to toxicological, transcriptomic, and toxicogenomic endpoints that will assist in developing QSARs for predicting the toxicity of nanomaterials.73-77
Computational approaches and the prediction of dose
Dosimetry refers to estimating or measuring the amount (in terms of mass, number, surface area, volume, etc.) of a nanomaterial at a specific biological target site at a particular point in time.78 The assessment of the dose delivered to the cells and the internalised dose (i.e. the dosimetry) is essential for interpretation of both in vitro and in vivo toxicity data. South Africa therefore uses the sedimentation, diffusion and dosimetry (ISDD) and volumetric centrifugation method (VCM) modelling platforms to calculate cellular delivered dose79 for the hazard identification of nanoparticles.
Dosimetry is also important for in vivo studies where the delivered dose to internal organs needs to be determined. The physiologically based pharmacokinetic model is standard procedure that is applied to simulate the absorption, distribution, metabolism, and elimination of chemical substances in organisms. In collaboration with international organisations, South African partners recently outlined future directions in the physiologically based pharmacokinetic modelling of nanomaterials.80 A recent sub-acute inhalation study demonstrated how this approach could be applied to assess the lung retention and particokinetics of AgNPs and AuNPs co-exposure in rats.81
Chemoinformatics and chemical structures
Chemoinformatics has solved the issue of representing chemical structures for small molecules as simple 1D codes, such as SMILES and InChl, which are machine-readable chemical identifiers. South Africa has contributed to a recent collaborative work, which considered the issues involved in developing an InChl for nanomaterials (NlnChli).82
Risk assessment and risk management methods
To understand the risk of nanomaterials, it is essential to obtain basic information on the following aspects of nanomaterials: physicochemical properties, in vitro and in vivo toxicity, dose-effect relationships and exposure scenarios for workers, consumers and the general environment (i.e. determining levels, frequency and duration of exposure). Therefore, risk assessment and risk management considerations have formed the core research areas for the DSI Nanotechnology HSE Risk Assessment programme. The aim of the programme is to integrate the quantitative exposure and hazard data obtained from all the HSE programme projects into risk assessment and other in silico models to predict nanomaterial behaviour and risks across the different life cycles of NEPs. Through data generated in the HSE programme, South Africa has been able to contribute to the integration of safety testing measures across the innovation chain of nanomaterials using new approach methodologies.77
Future prognosis
Nanomaterials and NEPs are increasingly being synthesised and commercialised in South Africa. In the past 5 years, there have been significant advances in research related to the components of the risk assessment process. By and large, these research activities were not undertaken in isolation but formed part of international nanomaterial HSE research programmes.
The achievements of the HSE programme could therefore be summarised as:
1. Support of regulation and decision-making through evidence-based data derived from a broad-base nanotechnology HSE research platform.
2. Establishment of the required tests and the necessary infrastructure to assess the hazardous nature of and determine exposure to nanomaterials that are being synthesised and soon to be commercialised in South Africa.
3. Establishment of the necessary human capital development to conduct such tests.
4. Continued collaborative research efforts in international research initiatives that are aimed at developing nanotechnology HSE testing methodologies and regulatory approaches, e.g. the OECD Working Party on Manufactured Nanomaterials programme and EU Horizon 2020 supported research projects.
5. Continued support of the development of international standards through ISO 229 Nanotechnologies where South Africa is represented by the South African Bureau of Standards (SABS) and the appointed experts contribute to the development of such nano-safety guidelines and standards for nanomaterials and nanotechnologies.
Through the participation and contributions of South African scientists in large-scale EU FP7 and Horizon 2020 funded nano-research programmes (e.g. Nanosolutions, Nanoharmony, caLIBRAte, NanoSolvelT), significant amounts of data have been generated. The challenge that now faces international and South African researchers is how to validate these predictions from cell lines to whole organisms and indeed other species (i.e. read-across extrapolation) and determine how these in vitro mode of action predictions influence higher level biological responses such as growth, reproduction, etc. Therefore, both local and international focus is on the use of additional knowledge-based tools such as the development of adverse outcome pathways that can be implemented in the risk assessment of nanomaterials. The necessity of implementing tools such as adverse outcome pathways arises from the fact that it may not be possible to conduct separate risk assessments for every nanomaterial and NEP
Furthermore, a glaring void that needs urgent attention in South Africa is nanomaterial HSE discussions between industry and authorities, as these have not yet been consistent. This partnership will facilitate in the risk management of NEPs produced in the country. Important work that still needs to be completed in this regard is:
1. Facilitate partnerships with industry to provide guidance on process-related exposures and worker protection.
2. Develop guidelines for the development of safe handling and use (industry).
3. Develop guidelines and standards to train researchers and workers for activities involving nanomaterials in the research and workplace environments in South Africa.
4. Identify, characterise, and communicate risks to all stakeholders through appropriate risk communication and risk management strategies. This will require research into risk communication strategies and integration into risk management frameworks. Thus, in line with international initiatives, risk communication needs to form an integral component of all nanotechnology research programmes.
5. Facilitate communication between stakeholders by providing support for industry partnerships and informed regulatory decision-making.
Acknowledgements
The activities of the Nanotechnology HSE Research Platform would not have been possible without the funding received from the Department of Science and Innovation. This paper is contribution number 530 of the Water Research Group (NWU).
Competing interests
We have no competing interests to declare.
Authors' contributions
M.G.: Conceptualisation; writing-initial draft; writing-revisions; project leadership. M.T.: Writing - initial draft; writing - revisions. X.M.: Project management; funding acquisition; writing - revisions. V.W.: Writing -initial draft; writing - revisions; corresponding author.
References
1. International Organization for Standardization (ISO). Nanotechnologles -Vocabulary - Part 1: Core terms. ISO standard number 80004-1:2010(en). Geneva: ISO; 2016. [ Links ]
2. US National Research Council (NRC). Science and judgment In risk assessment. Washington DC: National Academy Press; 1994. [ Links ]
3. Rasmussen K, Rauscher H, Kearns P, González M, Slntes JR. Developing 0ECD test guidelines for regulatory testing of nanomaterials to ensure mutual acceptance of test data. Reg Toxicol Pharmacol. 2019;104:74-83. https://doi.org/10.1016/j.yrtph.2019.02.008 [ Links ]
4. Nanoscale Science, Engineering, and Technology (NSET) Subcommittee NSET. National Nanotechnology Initiative Strategic Plan 20502. Washington DC: Executive Office of the President, National Science and Technology Council; 2014. [ Links ]
5. Savolalnen K, Backman U, Brouwer D, Fadeel B, Fernandes T, Kuhlbusch T, et al. Nanosafety In Europe 2015-2025: Towards safe and sustainable nanomaterials and nanotechnology Innovations. Helsinki: Finnish Institute of Occupational Health; 2013. [ Links ]
6. Musee N, Brent AC, Ashton PJ. A South African research agenda to Investigate the potential environmental, health and safety risks of nanotechnology. S Afr J Scl. 2010;106(3/4), Art. #159. https://doi.Org/10.4102/sajs.v106l3/4.159 [ Links ]
7. Gulumlan M, Kuempel ED, Savolalnen K. Global challenges In the risk assessment of nanomaterials: Relevance to South Africa. S Afr J Scl. 2012;108(9/10), Art. #922. https://doi.org/10.4102/sajs.v108l9/10.922 [ Links ]
8. Organisation for Economic Cooperation and Development (OECD). ENV/ JM/MONO(2016)2. Physical-chemical parameters: Measurements and methods relevant for the regulation of nanomaterials. No. 63. Paris: OECD Publishing; 2016. [ Links ]
9. Utembe W Potgieter K, Stefanlak AB, Gulumlan M. Dissolution and blodurablllty: Important parameters needed for risk assessment of nanomaterials. Part Fibre Toxicol. 2015;12:11. https://doi.org/10.1186/s12989-015-0088-2 [ Links ]
10. Organisation for Economic Cooperation and Development (OECD). ENV/JM/ MONO(2018)11. Assessment of blodurablllty of nanomaterials and their surface llgands. Paris: OECD Publishing; 2018. [ Links ]
11. International Organization for Standardization (ISO). Nanotechnologles - Use and application of acellular In vitro tests and methodologies to assess nanomaterial blodurablllty. ISO Report number ISO/TR19057. Geneva: ISO; 2018. [ Links ]
12. Mbanga O, Cukrowska E, Gulumlan M. Dissolution of citrate-stabilized, polyethylene glycol-coated carboxyl and amine-functlonallzed gold nanoparticles In simulated biological fluids and environmental media. J Nanopart Res. 2021 ;23:29. https://doi.org/10.1007/s11051-020-05132-x [ Links ]
13. Organisation for Economic Cooperation and Development (OECD). ENV/JM/MONO(2015)7. Dossier on gold nanoparticles. No. 44. Paris: OECD Publishing; 2015. [ Links ]
14. Andraos C, Yu IJ, Gulumian M. Interference: A much-neglected aspect In high-throughput screening of nanoparticles. Int J Toxicol. 2020;39:397-421. https://doi.org/10.1177/1091581820938335 [ Links ]
15. Ponti J, Klnsner-Ovaskainen A, Norlen H, Altmeyer S, Andreoli C, Bognl A, et al. Interlaboratory comparison study of the Colony Forming Efficiency assay for assessing cytotoxicity of nanomaterials. EUR 27009. Luxembourg: Publications Office of the European Union; 2014. [ Links ]
16. Vetten MA, Tlotleng N, Tanner Rascher D, Skepu A, Keter FK, Boodhla K, et al. Label-free in vitro toxicity and uptake assessment of citrate stabilised gold nanoparticles In three cell lines. Part Fibre Toxicol. 2013;10:50. https://doi.org/10.1186/1743-8977-10-50 [ Links ]
17. George JM, Magogotya M, Vetten MA, Buys AV, Gulumlan M. An Investigation of the genotoxlcity and interference of gold nanoparticles in commonly used in vitro mutagenicity and genotoxlcity assays. Toxicol Scl. 2017;156(1 ):149- 166. https://doi.org/10.1093/toxscl/kfw247 [ Links ]
18. Sanabrla NM, Gulumlan M. The presence of residual gold nanoparticles in samples interferes with the RT-qPCR assay used for gene expression profiling. J Nanoblotechnol. 2017;15:72. https://doi.org/10.1186/s12951-017-0299-9 [ Links ]
19. Vetten MA, Gulumian M. Interference of gold nanoparticles with in vitro endotoxin detection assays. Curr Nanosci. 2020;16:204-213. https://doi.org/10.2174/1573413715666181212120013 [ Links ]
20. Vetten MA, Yah CS, Singh T, Gulumlan M. Challenges facing sterilization and depyrogenation of nanoparticles: Effects on structural stability and biomedical applications. Nanomedlcine. 2014;10:1391-1399. https://doi.org/10.1016/j.nano.2014.03.017 [ Links ]
21. Stone V Johnston HJ, Baiharry D, Gernand JM, Gulumlan M. Approaches to develop alternative testing strategies to Inform human health risk assessment of nanomaterials. Risk Anal. 2016;36:1538-1550. https://doi.org/10.1111/risa.12645 [ Links ]
22. Vetten M, Gulumlan M. Differences in uptake of 14nm PEG-liganded gold nanoparticles Into BEAS-2B cells Is dependent on their functional groups. Toxicol Appl Pharmacol. 2019;363:131-141. https://doi.org/10.1016/j.taap.2018.11.014 [ Links ]
23. Tlotleng N, Vetten MA, Keter FK, Skepu A, Tshlkhudo R, Gulumlan M. Cytotoxicity, Intracellular localization and exocytosls of citrate capped and PEG functlonallzed gold nanoparticles In human hepatocyte and kidney cells. Cell Biol Toxicol. 2016;32:305-321. https://doi.org/10.1007/s10565-016-9336-y [ Links ]
24. Andraos C, Gulumian M. Intracellular and extracellular targets as mechanisms of cancer therapy by nanomaterials In relation to their physicochemical properties. Wiley Interdisclp Rev Nanomed Nanobiotechnol. 2020; e1680. https://doi.org/10.1002/wnan.1680 [ Links ]
25. Gulumlan M, Andraos C. In search of a converging cellular mechanism in nanotoxlcology and nanomediclne in the treatment of cancer. Toxicol Pathol. 2018;46:4-13. https://doi.org/10.1177/0192623317735776 [ Links ]
26. Organisation for Economic Cooperation and Development (OECD). OECD/ OCDE 412. OECD guidelines on the testing of chemicals 28-day (subacute) inhalation toxicity study. Paris: OECD Publishing; 2018. [ Links ]
27. Organisation for Economic Cooperation and Development (OECD). OECD/ OCDE 413 (2018e). OECD guidelines for the testing of chemicals 90-day (subchronic) Inhalation toxicity study. Paris: OECD Publishing; 2018. [ Links ]
28. Park JD, Kim JK, Jo MS, Kim YH, Jeon KS, Lee JH, et al. Lobar evenness of deposition/retention in rat lungs of inhaled silver nanoparticles: An approach for reducing animal use while maximizing endpoints. Part Fibre Toxicol. 2019;16:2. https://doi.org/10.1186/s12989-018-0286-9 [ Links ]
29. Jo MS, Kim JK, Kim Y, Kim HP, Kim HS, Ahn K, et al. Mode of sliver clearance following 28-day Inhalation exposure to sliver nanoparticles determined from lung burden assessment Including post-exposure observation periods. Arch Toxicol. 2020;94:773-784. https://doi.org/10.1007/s00204-020-02660-2 [ Links ]
30. Kim HP, Kim JK, Jo MS, Park JD, Ahn K, Gulumian M, et al. Even lobar deposition of poorly soluble gold nanoparticles (AuNPs) is similar to that of soluble sliver nanoparticles (AgNPs). Part Fibre Toxicol. 2020;17:54. https://doi.org/10.1186/s12989-020-00384-w [ Links ]
31. Gulumian M, Kelman B, Choi J, Kim H, Yu IJ. Effect of long-term exposure to sliver nanoparticles on blood coagulation In vivo. J Cardlo Vase Med. 2020;6:1-9. [ Links ]
32. Han SG, Lee JS, Ahn K, Kim YS, Kim JK, Lee JH, et al. Size-dependent clearance of gold nanoparticles from lungs of Sprague-Dawley rats after short-term Inhalation exposure. Arch Toxicol. 2014;89:1083-1094. https://doi.org/10.1007/s00204-014-1292-9 [ Links ]
33. Lee JH, Sung JH, Ryu HR, Song KS, Song NW, Park HM, et al. Tissue distribution of gold and sliver after subacute Intravenous injection of coadministered gold and sliver nanoparticles of similar sizes. Arch Toxicol. 2018;92:1393-1405. https://doi.org/10.1007/s00204-018-2173-4 [ Links ]
34. Lee JH, Gulumian M, Faustman EM, Workman T, Jeon K, Yu IJ. Blood biochemical and hematological study after subacute intravenous Injection of gold and sliver nanoparticles and co-admlnistered gold and silver nanoparticles of similar sizes. Blomed Res Int. 2018;2018, e8460910. https://doi.Org/10.1155/2018/8460910 [ Links ]
35. Lukhele LP, Mamba BB, Musee N, Wepener V. Acute toxicity of double-walled carbon nanotubes to three aquatic organisms. J Nanomater. 2015;2015; e219074. https://doi.org/10.1155/2015/219074 [ Links ]
36. Thwala M, Musee N, Slkhwivhllu L, Wepener V. The oxidative toxicity of Ag and ZnO nanoparticles towards the aquatic plant Spirodela punctata and the role of testing media parameters. Environ Scl Process Impacts. 2013;15:18301843. https://doi.org/10.1039/c3em00235g [ Links ]
37. Musee N, Oberholster PJ, Sikhwlvhilu L, Botha AM. The effects of engineered nanoparticles on survival, reproduction, and behaviour of freshwater snail, Physa acuta (Draparnaud, 1805). Chemosphere. 2010;81:1196-1203. https://doi.org/10.1016/j.chemosphere.2010.09.040 [ Links ]
38. Bosch S, Botha TL, Jordaan A, Maboeta M, Wepener V. Sublethal effects of Ionic and nanogold on the nematode Caenorhabditis elegans. J Toxicol. 2018;2018, e6218193. https://doi.org/10.1155/2018/6218193 [ Links ]
39. Voua Otomo P, Wepener V Maboeta MS. Single and mixture toxicity of gold nanoparticles and gold(lll) to Enchytraeus buchholzi (Oligochaeta). Appl Soil Ecol. 2014;84:231-234. https://doi.Org/10.1016/j.apsoll.2014.08.007 [ Links ]
40. Botha TL, James TE, Wepener V. Comparative aquatic toxicity of gold nanoparticles and Ionic gold using a species sensitivity distribution approach. J Nanomater. 2015;2015, e986902. https://doi.org/10.1155/2015/986902 [ Links ]
41. Botha TL, Boodhla K, Wepener V. Adsorption, uptake and distribution of gold nanoparticles In Daphniamagna following long term exposure. Aquat Toxicol. 2016;170:104-111. https://doi.Org/10.1016/j.aquatox.2015.11.022 [ Links ]
42. Johari SA, Rasmussen K, Gulumian M, Ghazl-Khansari M, Tetarazako N; Kashlwada S, et al. Introducing a new standardized nanomaterial environmental toxicity screening testing procedure, ISO/TS 20787: Aquatic toxicltyassessment of manufactured nanomaterials In saltwater Lakes using Artemia sp. nauplli. Toxicol Mech Methods. 2019;29:95-109. https://doi.org/10.1080/15376516.2018.1512695 [ Links ]
43. Botha TL, Elemlke EE, Horn S, Onwudiwe DC, Glesy JR Wepener V. Cytotoxicity of Ag, Au and Ag-Au bimetallic nanoparticles prepared using golden rod (Solidago canadensis) plant extract. Sci Rep. 2019;9:4169 https://doi.org/10.1038/S41598-019-40816-y [ Links ]
44. Botha TL, Brand SJ, Ikenaka Y, Nakayama SMM, Ishlzuka M, Wepener V. How toxic Is a non-toxic nanomaterial: Behaviour as an indicator of effect in Daniorerio exposed to nanogold. Aquat Toxicol. 2019;215, e105287. https://doi.org/10.1016/j.aquatox.2019.105287 [ Links ]
45. Brand SJ, Botha TL, Wepener V. Behavioural response as a reliable measure of acute nanomaterial toxicity In zebrafish larvae exposed to a carbon-based versus a metal-based nanomaterial. Afr Zool. 2020;55:57-66. https://doi.org/10.1080/15627020.2019.1702098 [ Links ]
46. Organisation for Economic Cooperation and Development (OECD). ENV-JM-MONO(2015)19: Harmonized tiered approach to measure and assess the potential exposure to airborne emissions of engineered nano-objects and their agglomerates and aggregates at workplaces. Paris: OECD Publishing; 2015. [ Links ]
47. US National Institute for Occupational Safety and Health (NIOSH). Current Intelligence Bulletin 65: Occupational exposure to carbon nanotubes and nanoflbers. Number 2013-145. Washington DC: Department of Health and Human Services; 2013. Available from: http://www.cdc.gov/nlosh/docs/2013-145/ [ Links ]
48. US National Institute for Occupational Safety and Health (NIOSH). Current Intelligence Bulletin 63: Occupational exposure to titanium dioxide. Number 2011-160. Washington: Department of Health and Human Services; 2011. Available from: https://www.cdc.gov/niosh/docs/2011-160/pdfs/2011-160.pdf [ Links ]
49. Occupational Safety and Health Administration (OSHA). OSHA fact sheet: Working safely with nanomaterials. Washington DC: OSHA; 2013. Available from: https://www.osha.gov/sltes/default/flles/publicatlons/OSHA_FS-3634.pdf [ Links ]
50. Van Broekhulzen P, Dorbeck-Jung B. Exposure limit values for nanomaterials - capacity and willingness of users to apply a precautionary approach. J Occup Environ Hyg. 2013;10:46-53. https://doi.org/10.1080/15459624.2012.744253 [ Links ]
51. Organisation for Economic Cooperation and Development (OECD). ENV/JM/ MONO(2016)60. Gold nanoparticle occupational exposure assessment in a pilot scale facility. Paris: OECD Publishing; 2016. [ Links ]
52. Bergamaschi E, Gulumian M, Kanno J, Savolainen K. Engineered nanomaterials: Blomarkers of exposure and effects. In: Gupta R, editor. Biomarkers In toxicology. Amsterdam: Elsevier; 2014. p. 697-716. https://doi.org/10.1016/B978-0-12-404630-6.00041-5 [ Links ]
53. Gulumian M, Verbeek J, Andraos C, Sanabrla N, de Jager P Systematic review of screening and surveillance programs to protect workers from nanomaterials. PLoS ONE. 2016;11 (11), e0166071. https://doi.org/10.1371/journal.pone.0166071 [ Links ]
54. World health Organization (WHO). WHO Guidelines on protecting workers from potential risks of manufactured nanomaterials. Geneva: WHO; 2017. Available from: https://apps.who.lnt/irls/bitstream/handle/10665/259671/9789241550048-eng.pdf [ Links ]
55. Musee N. Simulated environmental risk estimation of engineered nanomaterials: A case of cosmetics In Johannesburg City. Hum Exp Toxicol. 2011 ;30:1181-1195. https://doi.org/10.1177/0960327110391387 [ Links ]
56. Musee N, Zvimba JN, Schaefer LM, Nota K, Slkhwivhllu LM, Thwala M. Fate and behavior of ZnO- and Ag-engineered nanoparticles and a bacterial viability assessment In a simulated wastewater treatment plant. J Environ Scl Health A. 2014;49:59-66. https://doi.org/10.1080/10934529.2013.824302 [ Links ]
57. Chauque EFC, Zvimba JN, Nglla JC, Musee N. Fate, behaviour, and implications of ZnO nanoparticles In a simulated wastewater treatment plant. Water SA. 2016;42:72-81. https://doi.Org/10.4314/wsa.v42i1.09 [ Links ]
58. Nanja AF, Focke WW, Musee N. Aggregation and dissolution of aluminium oxide and copper oxide nanoparticles in natural aqueous matrixes. SN Appl Scl. 2020;2:1164. https://doi.org/10.1007/s42452-020-2952-4 [ Links ]
59. Leareng SK, Ubomba-Jaswa E, Musee N. Toxicity of zinc oxide and Iron oxide engineered nanoparticles to Bacillus subtilis in river water systems. Environ Scl: Nano. 2020;7:172-185. https://doi.org/10.1039/C9EN00585D [ Links ]
60. Utembe W Wepener V Yu IJ, Gulumian M. An assessment of applicability of existing approaches to predicting the bloaccumulatlon of conventional substances In nanomaterials. Environ Toxicol Chem. 2018;37:2972-2988. https://doi.org/10.1002/etc.4253 [ Links ]
61. Handy RD, Clark NJ, Boyle D, Vassallo J, Green C, Nasser F, et al. The bioaccumulation testing strategy for nanomaterials: Correlations with particle properties and a meta-analysis of In vitro fish alternatives to In vivo fish tests. Environ Scl Nano. 2022;9:684-701. https://doi.org/10.1039/D1EN00694K [ Links ]
62. Forster SP, Olvelra S, Seeger S. Nanotechnology in the market: Promises and realities. Int J Nanotech. 2011;8(6-7):592-613. https://doi.org/10.1504/IJNT.2011.040193 [ Links ]
63. Mitrano DM, Barber A, Bednar A, WesterhofLR Higgins CR Ranvillea JF.Silver nanoparticle characterization using single particle ICP-MS (SP-ICP-MS) and asymmetrical flow field flow fractionation ICP-MS (AF4-ICP-MS) J Anal At Spectrom. 2012;27:1131-1142. https://doi.org/10.1039/c2ja30021d [ Links ]
64. NowackB, Boldrln A, Caballero A, Hansen SF, Gottschalk F, Heggelund L, etal. Meeting the needs for released nanomaterials required for further testing -The SUN approach. Environ Scl Technol. 2016;50:2747-2753. https://doi.org/10.1021/acs.est.5b04472 [ Links ]
65. Von der Kammer F, Ferguson PL, Holden PA, Maslon, A, Rogers KR, Klalne SJ; et al. Analysis of engineered nanomaterials In complex matrices (environment and biota): General considerations and conceptual case studies. Environ Toxicol Chem. 2012;31:32-49. https://doi.Org/10.1002/etc.723 [ Links ]
66. Moeta PJ, Wesley-Smith J, Malty A, Thwala M. Nano-enabled products In South Africa and the assessment of environmental exposure potential for engineered nanomaterials. SN Appl Scl. 2019;1:577. https://doi.org/10.1007/S42452-019-0584-3 [ Links ]
67. Lehutso RF, Tancu X Malty A, Thwala M. Characterisation of engineered nanomaterials in nano-enabled products exhibiting priority environmental exposure. Molecules. 2021 ;26:1370. https://doi.org/10.3390/molecules26051370 [ Links ]
68. Hermann A, Dlesner M-O, Abel J, Hawthorne C, Greßmann A. Assessment of Impacts of a European register of products containing nanomaterials. Dessau-Roßlau: Umweltbundesamt [German Environment Agency]; 2014. [ Links ]
69. Nthwane YB, Tancu Y, Malty A, Thwala M. Characterisation of titanium oxide nanomaterials In sunscreens obtained by extraction and release exposure scenarios. SN Appl Scl. 2019;1:312. https://doi.org/10.1007/s42452-019-0329-3 [ Links ]
70. South African Department of Water and Sanitation (DWS). Water quality management policies and strategies for South Africa. Report no. 2.1. WQM Policy - Edition 1. Water Resource Planning Systems Series. DWS Report no.: 000/00/21715/12. Pretoria: DWS; 2016. [ Links ]
71. Scientific Committee on Consumer Safety (SCCS). Scientific advice of safety of nanomaterials In cosmetics. EU SCCS/1618/20. Luxembourg: European Commission; 2021. https://doi.org/10.2875/125512 [ Links ]
72. Food and Drug Administration (FDA). Nanotechnology - Over a decade of progress and Innovation. Washington DC: US Food and Drug Administration; 2020. Available from: https://www.fda.gov/medla/140395/downloadO [ Links ]
73. Afantltis A, Melagrakl G, Islgonis P, Tsoumanis A, Varsou DD, Valsaml-Jones E, et al. NanoSolvelT Project: Driving nanoinformatlcs research to develop Innovative and integrated tools for In silico nanosafety assessment. Comput Struct Biotechnol J. 2020;18:583-602. https://doi.org/10.1016/j.csbj.2020.02.023 [ Links ]
74. Klnaret PAS, Serra A, Federico A, Kohonen P, Nymark P, Llampa I, et al. Transcrlptomics In toxlcogenomics. Part I: Experimental design, technologies, publicly available data, and regulatory aspects. Nanomaterials. 2020;10(4):750. https://doi.org/10.3390/nano10040750 [ Links ]
75. Federico A, Serra A, Ha MK, Kohonen P, Choi J-S, Liampa I, et al. Transcrlptomics In toxlcogenomics. Part II: Preprocessing and differential expression analysis for high quality data. Nanomaterials. 2020;10(4):903. https://doi.org/10.3390/nano10050903 [ Links ]
76. Serra A, Fratello M, Cattelanl L, Liampa I, Melagrakl G, Kohonen P, et al. Transcrlptomics Intoxicogenomlcs. Part III: Data modelling for risk assessment. Nanomaterials. 2020;10(4):708. https://doi.org/10.3390/nano10040708 [ Links ]
77. Nymark P, Bakker M, Dekkers S, Franken R, Fransman W, Gracia-Bllboa A, et al. Toward rigorous materials production: New approach methodologies have extensive potential to Improve current safety assessment practices. Small. 2020:16(6), e1904749. https://doi.org/10.1002/smll.201904749 [ Links ]
78. Organisation for Economic Cooperation and Development (OECD). ENV/JM/ MONO(2012)40. Guidance on sample preparation and dosimetry for the safety testing of manufactured nanomaterials. Paris: OECD Publishing; 2012. [ Links ]
79. Hinderliter PM, Minard KR, Orr G, Chrisler WB, Thrall BD, Pounds JG, et al. ISDD: A computational model of particle sedimentation, diffusion and target cell dosimetry for in vitro toxicity studies. Part Fibre Toxicol. 2010:7:36. https://doi.org/10.1186/1743-8977-7-36 [ Links ]
80. Utembe W, Clewell H, Sanabrla N, Doganis P, Gulumlan M. Current approaches and techniques In physiologically based pharmacokinetic (PBPK) modelling of nanomaterials. Nanomaterials. 2020;10(4):1267. https://doi.org/10.3390/nanol0071267 [ Links ]
81. Kim JK, Kim HR Park JD, Ahn K, Kim WY Gulumlan M, et al. Lung retention and partlcokinetlcs of silver and gold nanopartlcles in rats following subacute Inhalation co-exposure. Part Fibre Toxicol. 2021 ;18:5. https://doi.org/10.1186/s12989-021-00397-z [ Links ]
82. Lynch I, Afantltis A, Exner T, Himly M, Lobaskln V Doganis R et al. Can an InChl for nano address the need for a simplified representation of complex nanomaterials across experimental and nanolnformatics studies? Nanomaterials. 2020;10(4):2493. https://doi.org/10.3390/nano10122493 [ Links ]
Correspondence:
Victor Wepener
Email: victor.wepener@nwu.ac.za
Received: 02 July 2021
Revised: 07 Oct. 2022
Accepted: 08 Oct. 2022
Published: 31 Jan. 2023
Editor: Pascal Bessong
Funding: South African Department of Science and Innovation
*Current: Science Advisory Programme and Strategic Partnerships, Academy of Science of South Africa (ASSAf), Pretoria, South Africa