JOURNAL PAPER

Safety considerations in underground logistics - a look at vertical, horizontal and in-stope transportation systems

S.M. Rupprecht

University of Johannesburg

SYNOPSIS

Transportation accounts for some 26% of all mine accidents in South Africa. Although this figure may not be as prolific as fall of grounds accidents or accidents caused by seismic events, the enormity of transportation accidents demands attention, especially as many of these accidents are avoidable.
This paper investigates vertical (i.e. shaft), horizontal (i.e. haulages), and in-stope transportation systems and their function as it applies to safety. Recent transportation accidents are discussed looking at current trends within the three transportation areas. In the shaft area, discussions will focus on handling of material cars, loading and off-loading of the workforce and management of shaft orepass systems. The horizontal component will focus on personnel transportation, safety around trains and hoppers, and handling of material in the cross-cut. The discussion on in-stope transportation will focus on the general congestion of the stope environment and how it affects the overall movement of personnel, material, and rock. Of concern are the large numbers of material handling and scraper winch accidents that occur and which will be discussed in some detail. The paper will conclude with a section on proposed guidelines within the three above-mentioned systems for mine engineers to consider in mine design and life of mine planning and scheduling.

Keywords: Underground logistics, safety in material handling

“Full text available only in PDF format”

References

1. Adapted from: Mine death causation factors pie chart from Creamer's Media Mining Weekly, February 1-7 2008. p. 8.         [ Links ]

2. MASLIN, N. Track Work Guideline. Personal Communication. 1999.         [ Links ]

3. ZONDI, M.M.A. Mine Health and Safety Legislation on Winding Plant and Shafts. Mine Hoisting 2000, Johannesburg. The South African Institute of Mining and Metallurgy, 2000, pp. 5-9.         [ Links ]

4. DOHM, M. RUPPRECHT, S.M., RUPERT, C., and GOVENDER D. Audit of Current Shaft Systems. Deepmine Collaborative Research Programme, December, 2000.         [ Links ]

5. BINKS, T.J. Underground Transport Accidents-Investigations and Recommendations. Underground Transport Symposium, Edgar, R.C.R. (ed.) Johannesburg. Association of Mine Resident Engineers, 1986, pp. 197-217.         [ Links ]

6. VAN DER WALT, P.G., NAUDE, J., LUBBE, S.W., HUTCHESON, P.J., MEYER,J.P., and SPENCER, K.C. Coupling system and design in use in the Gold and Platinum sector. Safety in Mines Research Advisory Committee, September 2000.         [ Links ]

7. KONONOV, V A. Personal communication. October, 2002.         [ Links ]

8. Working Environment Minerals Industry Safety Hand Book Sect 4.4.3.3, Part 4, January 2004.         [ Links ]

9. PAGE, T.P.T., MORTON, G.A., and VERMAAK, A. Investigate safety of rail vehicles and systems operation in South African Gold mines. Safety in Mines Research Advisory Committee, May 2005.         [ Links ]

10. RUPPRECHT, S.M., WILLIAMS, S., and MACNULTY, N. Transportation as associated with different mining layouts. Deepmine Collaborative Research Programme, December, 2000.         [ Links ]

11. MOSEME, R., FOSTER, P.J., DEMANA, R.L., and RUPPRECHT, S.M. Investigations into the causes of accidents on scraper systems in the Gold and Platinum mining sectors. Safety in Mines Research Advisory Committee, November 2003.         [ Links ]