Articles |
| |
| · From image to CAD. A digital photogrammetry system for the semi-automatic mapping of plants and pipe-systems Cammidge, M.; Riither, H.
|
| |
| · Preliminary emissions analysis of a methanol/dimethyl ether fuelled compression ignition engine Gaspari, R.; Cipolat, D.
|
| |
| · Comparison of three finite-volume interpolation schemes Harms, T.M.; Von Backström, T.W.; du Plessis, J.P.
|
| |
| · Modelling of scull drag at the orthogonal point of a rowing stroke Hartwanger, D.; Bunt, E.A.
|
| |
| · Transient resonance in a hoisting cable system with a periodic excitation Kaczmarczyk, Stefan
|
| |
| · The use of linear observers to estimate vehicle states during severe handling manoeuvres Kleine, Sven; van Niekerk, Johannes L.
|
| |
| · High speed metal forming with liquid shock waves Kosing, O.E.; Skews, B.W.
|
| |
| · Research Note: Preliminary investigation of heat transfer augmentation by means of spiral wires in the annulus of tube-in-tube heat exchangers Swanepoel, W.; Meyer, J.P.
|
| |
| · Heat transfer augmentation in the annulus of a heat exchanger consisting of a round tube inside a twisted square tube van der Vyver, S.; Meyer, J.P.
|
| |
| · Strain modal testing - a critical appraisal Vári, L.M.; Heyns, P.S.
|
| |
| · Flow loss coefficients at air-cooled condenser finned tube inlets Zipfel, T.; Kroger, D.G.
|
| |
| · A design method for single-finned-tube-row air-cooled steam condenser to avoid back flow of steam into any finned tube Zipfel, T.; Kroger, D.G.
|
| |