Abstract

MAJA, M.E.; MARUMA, M.G.; MAMPURU, L.A.  and  MOEMA, S.J.. Effect of niobium on the solidification structure and properties of hypoeutectic high-chromium white cast irons. J. S. Afr. Inst. Min. Metall. [online]. 2016, vol.116, n.10, pp.981-986. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2016/v116n10a14.

The most commonly used high-chromium white cast iron (HCWCI) is the hypoeutectic white cast iron that contains 2-3.5 wt.% C and 10-30% Cr. This type of material relies on hard, brittle M₇C₃ carbides to impart good wear resistance. Due to its good wear resistance, this material has found application in the mining industry and cement industry. However, it has low fracture strength and this challenge led to research aimed at refining the microstructure. This was done by the addition of niobium in the range between 0.1 and 0.6 wt.%. In the as-cast condition, the addition of niobium was found to increase the fracture strength due to the finer eutectic microstructure. The hardness was also found to have increased slightly compared to the reference alloy with no niobium additions. Low fracture strength after heat treatment was observed in the Nb-added HCWCI, which is believed to have been caused by the precipitation of secondary carbides and the transformation of the matrix from austenite to martensitic.

Keywords : HCWCI; niobium; grain refinement; fracture strength.

        · text in English     · English ( pdf )