Abstract

TAUTE, C. et al. Characterization of additively manufactured AlSilOMg cubes with different porosities. J. S. Afr. Inst. Min. Metall. [online]. 2021, vol.121, n.4, pp.143-150. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/1331/2021.

Additive manufacturing can be used to produce complex and custom geometries, consolidating different parts into one, which in turn reduces the required number of assemblies and allows distributed manufacturing with short lead times. Defects, such as porosity and surface roughness, associated with parts manufactured by laser powder bed fusion, can severely limit industrial application. The effect these defects have on corrosion and hence long-term structural integrity must also be taken into consideration. The aim of this paper is to report on the characterization of porosity in samples produced by laser powder bed fusion, with the differences in porosity induced by changes in the process parameters. The alloy used in this investigation is AlSi10Mg, which is widely used in the aerospace and automotive industries. The sample characteristics, obtained by X-ray tomography, are reported. The design and production of additively manufactured parts can be improved when these defects are better understood.

Keywords : additive manufacturing; L-PBF; AlSi10Mg; porosity; surface roughness; density.

        · text in English     · English ( pdf )