Resumen

GOSHTASBI, K.; ATAEI, M.  y  KALATEHJARY, R.. Slope modification of open pit wall using a genetic algorithm - case study: southern wall of the 6th Golbini Jajarm bauxite mine. J. S. Afr. Inst. Min. Metall. [online]. 2008, vol.108, n.10, pp.651-656. ISSN 2411-9717.

In this paper a genetic algorithm is used in a heavily jointed rock mass in order to investigate the critical circular slip surface and modification of slope surface. This method was applied to the southern wall of the 6th Golbini Jajarm bauxite mine. The mine is the largest bauxite deposit in Iran, located to the northeast of the town of Jajarm in the Khorasan province. Estimated reserve of bauxite in this deposit is about 160 million tonnes. Field and laboratory investigations were conducted in order to determine rock mass behaviour. A genetic algorithm code that uses the Simplified Bishop method as an objective function was developed for finding the safety factor of circular slip surfaces. Sensitivity analysis was applied to determine the optimum values of the genetic algorithm variables, such as population size, selection method, crossover and mutation rates. After finding the critical circular slip surface, slope modification is carried out by removing unstable sections from marked critical slip surfaces, and this process is repeated until the last unsafe section is removed. Based on this code, modification occurred during 7 steps, by reaching a safety factor of 1.3 in the last step. Finally, the modified slope angle of the southern wall of the 6th Golbini Jajarm bauxite mine was determined to be 48.44 degrees.

Palabras clave : Genetic algorithm; slope modification; circular slips surface; 6th Golbini Jajarm bauxite mine.

        · texto en Inglés     · Inglés ( pdf )