Resumen

SWART, M.A.; HOCKADAY, L.; REYNOLDS, Q.  y  CRAIG, K.. Dependence of solar reflector soiling on location relative to a ferromanganese smelter. J. S. Afr. Inst. Min. Metall. [online]. 2023, vol.123, n.6, pp.299-308. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2021/2023.

A solar reflector soiling study was carried out at a ferromanganese smelter in South Africa to assess the soiling rates at different locations around the plant. Several meteorological parameters were monitored to give insight into the conditions that lead to increased soiling. Mineralogical characterization of dust samples collected from the reflectors and the atmosphere revealed that only a certain size fraction is of importance with regard to soiling, and that the dust can be attributed to both raw materials and smelter products. Proximity to the dust source was the primary driver for increased soiling. The site that experienced the most soiling was very close to raw material heaps; this was deemed an outlier and was excluded from the summary statistics. The secondary driver for increased soiling was location relative to the smelter dust sources and the wind's direction and speed. The reflector set at the best location experienced 13.1% less soiling than the set at the 'worst' (but still feasible) location, represented by an averaged mean daily reflectance loss of 0.0186. The study revealed that while there are periods of intense soiling at this particular site, proper planning of reflector location in relation to the smelter dust sources can significantly mitigate the soiling rate.

Palabras clave : Heliostat soiling; energy-intensive industry (EII); solar thermal process heat; concentrating solar thermal (CST).

        · texto en Inglés     · Inglés ( pdf )