Servicios Personalizados
Articulo
Indicadores
Links relacionados
Citado por Google
Similares en Google
Compartir
South African Journal of Industrial Engineering
versión On-line ISSN 2224-7890
versión impresa ISSN 1012-277X
Resumen
THEJANE, K.; CHIKOSHA, S. y DU PREEZ, W.B.. Characterisation and monitoring of Ti6AL4V (ELI) powder used in different selective laser melting systems. S. Afr. J. Ind. Eng. [online]. 2017, vol.28, n.3, pp.161-171. ISSN 2224-7890. http://dx.doi.org/10.7166/28-3-1853.
The characterisation and monitoring of TÍ6A14V (ELI) feedstock powder is an essential requirement for the full qualification of medical implants and aerospace components produced in selective laser melting systems. Virgin and reused samples of this powder were characterised by determining their physical and chemical properties through techniques complying with international standards. This paper presents the results obtained for Ti6Al4V (ELI) powder of two different particle size distributions received from the same supplier. The characteristics of these powders after several reuse cycles in two different selective laser melting systems are also presented and discussed.