Resumen

MASINA, B. N; LENGOPENG, T; PITYANA, S.L  y  TLOTLENG, M. Microstructure and mechanical characterisation of tial coated on Ti64. S. Afr. J. Ind. Eng. [online]. 2017, vol.28, n.3, pp.172-177. ISSN 2224-7890.  http://dx.doi.org/10.7166/28-3-1854.

In this study, TiAl alloy was coated on Ti64 using a 1074nm high power continuous-wave laser while varying the laser beam scanning speed. This was done in order to increase the thermo-mechanical properties of Ti64. Scanning electron microscopy (SEM), light optical microscopy, and Vickers' micro-hardness were used to characterise the clad for macrostructure, composition, and hardness respectively. The macro- and micrographs of the clads indicated a needle- and dendritic-rich structure for the clads and widmanstatten structure at the interface for all the scanning speeds. The overall hardness was found to be high at low scanning speed.

        · resumen en Africano     · texto en Inglés     · Inglés ( pdf )