Resumen

YUAN, Y. et al. Fully mechanized longwall mining with two shearers: A case study. J. S. Afr. Inst. Min. Metall. [online]. 2018, vol.118, n.10, pp.1079-1086. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2018/v118n10a9.

To reduce production costs and increase efficiency in ageing coal mines, a system that utilizes two shearers in a fully mechanized longwall working face is proposed. Using theoretical and engineering experience, three issues pertaining to the system were determined: (a) the two-shearer mining technique; (b) matching and modifying the equipment; (c) and coal-cutting task allocation for each shearer. Two mining processes are proposed, with the two shearers travelling in either the same or opposing directions. To avoid breakage of chains and pan extrusion of the armoured face conveyor (AFC), the length of the AFC 'snake' was controlled. To ensure continuous cutting and transporting of coal, the cross-sectional dimensions of the AFC were checked and the shearer closer to the head drive was modified. Based on the assumption of equal cutting times for each shearer, the meeting position of the two shearers was obtained by using a theoretical model of mining task allocation. Application of this technique at No. 2 Jining Mine, China, has shown remarkable benefits: daily production capacity was increased by 54% and personnel efficiency was improved by 33 t/d per person.

Palabras clave : super-long working face; two shearers; AFC; 'snake' length; shearer modification; coal-cutting task allocation.

        · texto en Inglés     · Inglés ( pdf )