Serviços Personalizados
Artigo
Indicadores
Links relacionados
Citado por Google
Similares em Google
Compartilhar
South African Journal of Industrial Engineering
versão On-line ISSN 2224-7890
versão impressa ISSN 1012-277X
Resumo
TSHABALALA, N.V.; NYEMBWE, K.D. e VAN TONDER, P.J.M.. Optimisation of a resin-coated chromite sand for rapid sand casting applications. S. Afr. J. Ind. Eng. [online]. 2021, vol.32, n.3, pp.290-298. ISSN 2224-7890. http://dx.doi.org/10.7166/32-3-2665.
Applications of three-dimensional printing (3DP) to sand casting have been well-established in the last two decades. The preferred raw material is silica (quartz) sand, as it is the most readily available and cost effective sand. However, silica sand as a refractory material has some technical limitations, including high thermal linear expansion, low refractoriness, and thermal conductivity. Therefore, it is not suitable for all castings. Other refractory sand types are available, including chromite sand, which is abundantly available in South Africa. Analysis of the physical and chemical properties of in-laboratory coating of a locally available chromite sand was conducted through known metal foundry tests that provide an understanding of the quality and suitability of the use of chromite sand as a potential substitute for silica material for rapid sand-casting applications. The results of this study will inform the industry about the optimisation of parameters for the manufacturing of a resin-coated chromite sand and its use in additive manufacturing using a Voxeljet VX 1000 printer.