Serviços Personalizados
Artigo
Indicadores
Links relacionados
-
Citado por Google
-
Similares em Google
Compartilhar
Journal of the Southern African Institute of Mining and Metallurgy
versão On-line ISSN 2411-9717
versão impressa ISSN 2225-6253
J. S. Afr. Inst. Min. Metall. vol.108 no.8 Johannesburg Ago. 2008
TRANSACTION PAPER
Merensky pillar strength formulae based on back-analysis of pillar failures at Impala Platinum
B.P. WatsonI; J.A. RyderII; M.O. KatakaI; J.S. KuijpersI; F.P. LeteaneI
ICSIR, Johannesburg, Gauteng, South Africa
IIRyder Marketing and Research, Johannesburg, Gauteng, South Africa
SYNOPSIS
The Bushveld platinum group metal deposits are two distinct, shallow-dipping stratiform tabular orebodies and strike for many hundreds of kilometres. Mining is extensive, with depths ranging from close-to-surface to 2 000 m. The mining method is a variation of planar open stoping. Pillars are widely used to support the open stopes. Little work has been done in the past to determine pillar strength and pillars have been designed using experience and formulae developed for other hard-rock mines. This has led to oversize pillars with consequential loss of ore or undersize pillars resulting in potential collapses or pillar bursts. This paper describes a back-analysis of pillar failures at Impala Platinum, just north of Rustenburg, and provides insights into pillar behaviour. Strength formulae are presented for Merensky Reef pillars at Impala. These formulae may be used cautiously on other platinum mines with similar geotechnical and geomechanical conditions.
“Full text available only in PDF format”
References
1. ROBERTS, M.K.C., GRAVE, D.M.H., JAGER, A.J. and KLOKOW, J. Rock Mass Behaviour of the Merensky Reef at Northam Platinum Mine. SARES, Johannesburg, 1997. [ Links ]
2. COMRO. MINSIM-D User's Manual, Chamber of Mines of South Africa, Johannesburg. 1981. [ Links ]
3. SPOTTISWOODE, S.M. and MILEV, A.M. A methodology and computer program for applying improved, inelastic ERR for the design of mine layouts on planar reefs. SIMRAC GAP722 Final Report. SIMRAC. Johannesburg, 2002. p.p 85. [ Links ]
4. RYDER, J.A., WATSON, B.P. and KATAKA, M.O. Pillar strength back-analyses. PlatMine 1.2, Johannesburg. 2005. [ Links ]
5. WATSON, B.P., KUIJPERS, J. NKWANA, M.M. and VAN ASWEGEN, L. The stress-strain behavior of in-stope pillars in the Bushveld Platinum deposits in South Africa. J. South African Inst. Min. and Met. vol. 107, 2007. [ Links ]
6. ROBERTS, D.P., ROBERTS, M.K.C., JAGER, A.J. and COETZER, S. The determination of the residual strength of hard rock crush pillars with a width to height ratio of 2:1. J. South African Inst. Min. and Met. vol. 105, 2005. pp. 401-408. [ Links ]
7. ROBERTS, D.P., CANBULAT, I. and RYDER, J.A. Design parameters for mine pillars: strength of pillars adjacent to gullies; design of stable pillars with w/h ratio greater than 6; optimum depth for crush pillars. SIMRAC GAP617 Final Report. SIMRAC. Johannesburg. 2002. [ Links ]
8. WAGNER, H. Determination of the complete load-deformation characteristics of coal pillars. Proceedings of 3rd International Congress on Rock Mechanics, ISRM, Denver, vol. 2B, 1974. pp. 1076-1082. [ Links ]
9. SALAMON, M.D.G. and MUNRO, A.H. A study of the strength of coal pillars. J. South African Inst. Min. and Met., vol. 68. 1967. [ Links ]
10. WAWERSIK, W.R. Experimental study of the fundamental mechanisms of rock failure. Thesis, U. of Minnesota. 1968. [ Links ]
11. KOTZE, TJ. A report on the collapse that took place in the 4 Shaft area of Bafokeng South. Mine Internal Report no. G.R.M. 9/74. 1974. [ Links ]
12. BIENIAWSKI, Z.T. and VAN HEERDEN, W.L. The significance of in situ tests on large rock specimens. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. vol. 12. 1975. [ Links ]
13. RYDER, J.A. and OZBAY, M.U. A methodology for designing pillar layouts for shallow mining. Int. Symp. on Static & Dyn. Consids. in Rock Eng., Swaziland, ISRM. 1990. [ Links ]
14. HEDLEY, D.G.F. and GRANT, F. Stope pillar design for the Elliot Lake uranium mines. Bull. Can. Inst. Min. Metal., 1972. pp. 65. [ Links ]
15. MADDEN, B.J. A re-assessment of coal-pillar design. J. South African Inst. Min. and Met., vol. 91, no. 1. 1991. [ Links ]
16. STAVROPOULOU, V.G. Behaviour of a brittle sandstone in plane strain loading conditions. Proc. 23rd U.S. Symp. on Rock Mechs., Berkeley, Cal. 1982. [ Links ]
17. Itasca consulting group, inc. Fast Lagrangian Analysis of Continua (FLAC), Vers. 3.2. Minneapolis Minnesota USA. 1993. [ Links ]
18. YORK, G. Numerical modeling of the yielding of a stabilizing pillar/ foundation system and a new design consideration for stabilizing pillar foundations, J. South African Inst. Min. and Met. vol. 98, 1998. pp. 281-293. [ Links ]
19. PRANDTL, L. Zeit. Angew. Math. Mech. vol. T, no. 1, 1921. pp. 15-20. [ Links ]
20. HERTZ, H. On the contact of rigid solids and on hardness, miscellaneous papers, Macmillan, London. 1896. [ Links ]
21. COOK, N.G.W., HOOD, M. and TSAI, F. Observations of crack growth in hard rock loaded by an indenter. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., vol. 21, no. 2, 1984. pp. 97-107. [ Links ]
22. DEDE, T. Fracture onset and propagation in layered media. MSc dissertation, University of the Witwatersrand, Johannesburg. 1997. [ Links ]
23. ÖZBAY, M.U. and RYDER, J.A. The effect of foundation damage on the performance of stabilizing pillars. J.S. Afr. Inst. Min. Metall., vol. 90, no. 2, 1990. pp. 29-35. [ Links ]
24. WAGNER, H. and SCHÜMANN, E.H.R. The stamp-load bearing strength of rock. An experimental and theoretical investigation. Rock Mechanics, vol. 3, 1971. pp. 185-207. [ Links ]