Resumo

EL-SAYED, M.A.. An investigation of the behaviour of double oxide film defects in aluminium-magnesium cast alloys. J. S. Afr. Inst. Min. Metall. [online]. 2018, vol.118, n.11, pp.1225-1231. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2018/v118n11a13.

Double oxide films (bifilms) are significant defects in light alloy castings that occur when, during melt handling, the oxidized surface of the melt is folded over onto itself and then entrained into the liquid metal, encapsulating a portion of the local atmosphere. These defects create crevices in the final castings and have been shown to decrease tensile and fatigue properties, and also to increase their scatter, making casting properties unreproducible and unreliable. This paper reports on two different experiments performed to study the behaviour of such defects in Al alloys. In the first experiment and as a proxy for a bifilm, air bubbles were held in an Al-5Mg alloy melt for varying periods of time before the melt was allowed to solidify. The composition of the gas content of the bubbles was subsequently analysed using mass spectrometry to ascertain how it changed with time. In the other experiment the influence of the age of bifilms on the mechanical properties of Al-5Mg castings was assessed by holding castings in the liquid state for different times before solidification, followed by mechanical property testing and SEM and EDX studies of the fracture surfaces of tensile test bars. This research could provide a better understanding of the behaviour of double oxide film defects, and may lead to the development of new techniques by which these defects could be eliminated, or at least deactivated, in light alloy castings.

Palavras-chave : aluminium alloys; oxide films; entrainment; mechanical properties.

        · texto em Inglês     · Inglês ( pdf )