Services on Demand
Article
Indicators
Related links
-
Cited by Google
-
Similars in Google
Share
South African Journal of Animal Science
On-line version ISSN 2221-4062
Print version ISSN 0375-1589
S. Afr. j. anim. sci. vol.53 n.1 Pretoria 2023
http://dx.doi.org/10.4314/sajas.v53i1.15
SHORT COMMUNICATION
Performance, carcass yield, and meat quality of buffalo (Bubalus bubalis) fed on diets with different levels of concentrate
S. A. F. MeloI 0000-0002-3337-3597 ; A.L.R. MagalhãesI 0000-0003-2211-6795;M.L.M.W. NevesII 0000-0003-0077-4041; F.F.R. DE CarvalhoII 0000-0001-9211-0263; A. A. S. MeloI 0000-0002-1196-8047; G. H. P. VieiraII 0000-0002-3476-7651;D.O. LimaI 0000-0002-7145-8890; D.M. De Lima JúniorIII, # 0000-0002-1154-8579; R.A.S. PessoaII 0000-0001-5361-0214
IFederal University of Agreste of Pernambuco, Bom Pastor Street, s/n, Boa Vista, 55292-270, Garanhuns, Pernambuco, Brazil
IIRural Federal University of Pernambuco, Dom Manoel de Medeiros Street, s/n, Dois Irmãos, 52171-900, Recife, Pernambuco, Brazil
IIIRural Federal University of Semiarid, Francisco Mota Street, 572, Costa e Silva, 59625-900, Mossoró, Rio Grande do Norte, Brazil
ABSTRACT
The objective of this study was to evaluate the influence of diets with increasing concentrate levels on performance, carcass characteristics, and meat quality of Murrah buffaloes in feedlot. Twenty-four animals, with an initial body weight of 240 ± 50.5 kg and mean age of 9 months, were distributed to four treatments: 20%, 40%, 60% and 80% concentrate. After 114 days, the animals were weighed, slaughtered, and meat quality and performance data were submitted to analysis of variance and regression. The dry matter intake and average daily gain increased linearly. The final body, hot carcass, and cold carcass weights responded linearly to increases in concentrate level. The subcutaneous fat thickness, protein, and ether extract of meat increased linearly with an increase in concentrate level. The colour parameters, cooking losses, and shear force of the meat were not affected by increasing the concentrate. The inclusion of concentrate in feedlot diets increases performance, characteristics of carcass, and meat quality of Murrah buffalo in a feedlot.
Keywords: average daily gain, feedlot buffalo, fat thickness, meat colour
Introduction
Buffalo are usually farmed extensively based on native pasture. Due to the seasonality of forage production in some regions, producers may need to use concentrated feeds to supplement their herds (Contò et al., 2022). There is a need to encourage the slaughter of young animals and the characterization of their meat to standardise and create a product identity, such that buffalo meat commercialization can be improved (Li et al., 2018; Ulutaç et al., 2021).
The quality and quantity of buffalo meat depends upon several factors, such as breed, age, feeding intensity, management system, and environmental conditions (Awan et al., 2014; Naveena & Kiran, 2014). Andrighetto et al. (2008) noted that as the level of concentrate in the diet increased, the degree of fat in the carcass increased due to the high level of energy available, leading to higher fat deposition. There is therefore a need to find an optimum level of concentrate and to seek feed that favours productive gains (Masucci et al., 2016), is less expensive, meets the needs of the buffalo, and generates carcasses and quality meat (Kandeepan et al., 2009), both during the period of the greatest forage production and during the dry season. There has been a wide discussion about the ideal level and quality of the concentrate to be used in the diets (Azmi et al., 2021). However, data related to buffalo, especially the Murrah breed, are scarce. The objective of this study was therefore to evaluate the performance, carcass characteristics, and meat quality of Murrah buffalo fed different levels of concentrate.
Materials and Methods
This research was approved by the Animal Use Ethics Committee in Research (CEUA-UFRPE), technical report N° 075/2015, following the recommendations of the National Council for Animal Experimentation Control (CONCEA) for the protection of animals used for scientific purposes.
The research was carried out in the Bubalinoculture Sector of the Animal Science Department of the Federal Rural University of Pernambuco (UFRPE), located in the city of Recife, Pernambuco (geographical coordinates of 8°04'03' 'S and 34°55'00'' W). Twenty-four non-castrated Murrah bulls, with a mean age of 9 months and an average body weight of 240± 50.5 kg, were randomly distributed in four treatments with six replicates.
The animals were housed in individual stalls in a covered confinement shed, with free access to a feeder and drinking fountain. Before the start of the experiment, the buffaloes were identified, vaccinated against foot-and-mouth disease and rabies, and treated against endo- and ectoparasites.
The experimental period lasted 114 days and was divided into a 30-day adaptation period (when the animals were treated against ecto- and endoparasites and received supplementation of A, D and E vitamins), and an 84-day period of the feeding trial (for data and sample collection).
To estimate voluntary feed intake, refusals were saved and weighed before each feeding; the feed intake was estimated by the difference between the offer and refusal (up to 15%). The diets were formulated to be isonitrogenous and composed of sugarcane forage (variety RB92579), maize/ corn meal, wheat bran, and soybean meal. Animals were fed with 20, 40, 60, and 80% inclusion of concentrate in the dry matter of the diet (Table 1), and formulated to meet the nutritional requirements of buffalo for a weight gain of 800 g/day (Paul, 2011).
Weekly feed samples were collected and dried in an oven with forced ventilation at 55 °C to perform the chemical composition analysis. The contents i.e., dry matter (DM), organic matter (OM), and crude protein (CP) analyses were performed according to the AOAC (2012), method numbers 934.01, 930.05, and 981.10, respectively. Ether extract (EE) was analysed using Soxhlet extraction with petroleum ether, according to method number 920.39 of the AOAC (2012). The concentration of neutral detergent fibre (NDF) was assayed with heat-stable amylase and corrected for ash and nitrogen compounds [aNDFOM(n)] by using techniques described by Mertens (2002), with corrections for protein according to Licitra et al. (1996), with added thermostable alpha-amylase. Non-fibre carbohydrates (NFC) were calculated according to the method of Hall (2000):
where CP = crude protein; NDFap = neutral detergent fibre corrected for ash and protein; and EE = ether extract.
To determine indigestible neutral detergent fibre (NDFi), samples of all foods were incubated in the rumen of a buffalo for 288 hours, as suggested by Detmann et al. (2012).
At the start and end of the experiment, the animals were weighed after a 16-h solid fast to determine average daily weight gain (ADG). At the end of the experiment, after 16 hours of fasting, the animals were weighed and then slaughtered according to RIISPOA standards (Brazil, 2000) and standard slaughterhouse procedures.
After slaughter, the carcass of each animal was divided into two half-carcasses, which were identified and weighed to obtain the weight of the hot carcass. Measurements were then made on the left half of the carcass, estimating carcass length, chest depth, leg length, leg thickness, and leg perimeter (Gomes et al., 2021). The carcasses were taken to the cold chamber at 4 °C and after 24 h, the cold carcass weight, losses from cooling, pH, and temperature were measured by means of a digital meter (Testo SE & CO, Lenzkirch, GER).
Carcass compactness index was calculated as:
CCI (kg/cm) = cold carcass weight/internal carcass length
To obtain the longissimus thoracis et lumborum muscle area in the left half carcass, an incision was performed between the 12th and 13th ribs to expose the muscle, the area of which was hatched on transparent plastic sheet and later obtained by means of a digital planimeter (HAFF ®, Digiplan model). At the same position, the subcutaneous fat thickness was measured with the aid of callipers. Samples were collected from the longissimus muscle, which were identified, vacuum-packed, and immediately frozen (-20 °C) for further analysis.
Samples of the longissimus muscle collected from the 10th and 13th rib areas were used for the physico-chemical analysis of the meat. The chromatic characterization was performed according to the method of Ramos & Gomide (2017) using Minolta colourimeter (model Chroma Meter CR-400), operating in the CIE system (L *, a *, b *). To evaluate cooking losses (CL), the samples were previously thawed for 24 h under refrigeration (4°C) and cut into 2.5-cm thick steaks. Then, the steaks were roasted in a preheated oven at a temperature of 200 °C, until reaching 70 °C in the geometric centre; the temperature was monitored using a specialized thermometer. The losses during cooking were calculated from the weight difference of the samples before and after cooking and expressed as a percentage, according to the procedure cited by Duckett et al. (1998). Following the methodology of Ramos & Gomide (2017), three cylindrical/cores samples were taken in the longitudinal direction of the fibres from the remaining cooked samples, with the aid of a 1.27-cm diameter borer. The force required to cut each cylinder was measured using the Warner-Bratzler Shear Force (Model 3000).
Samples of the longissimus muscle (ground in a ball mill, placed in 90 χ 15 mm Petri dishes, weighed, and frozen at -20 °C), were used for the composition analyses. After freezing, the samples were lyophilised to obtain dry matter (DM) and humidity according to protocol no. 925.09 (AOAC, 2012). The levels of minerals were evaluated in a muffle furnace (942.05), crude protein (CB) was assessed using the micro-Kjeldahl method (954.01), and ether extract was assessed using the Soxhlet method (EE) (920.39) (AOAC, 2012).
Data were submitted to analysis of variance and regression using the GLM procedure of SAS (Statistical Analysis System), considering a level of significance of 5% for data analysis. The experimental model used was completely randomized with four groups and six replicates per groups, according to the model:
where Yij = dependent variable observed; μ = overall mean; Ti = effect of groups i (i = 1 to 4); and eij = experimental error.
Results and Discussion
An increase in concentrate levels resulted in an increase (P <0.05) in the dry matter intake and average daily gain (ADG). Body weight at slaughter (BWS) showed a linear increase (P <0.05) as the levels of concentrate in the diet increased, ranging from 275.25 to 342.06 kg. Hot carcass weight (HCW) and cold carcass weight (CCW) showed the same pattern (P <0.05) for BWS (Table 2).
There was a linear effect (P <0.05) for protein and ether extract in buffalo meat due to the increasing inclusion of concentrate (Table 3). There was no influence (P >0.05) of the increasing inclusion of concentrate on the colour parameters, cooking losses, and shear force of the meat. An increase in concentrate levels resulted in an increase (P <0.05) in the carcass compactness index (CCI), subcutaneous fat thickness (EGS) and longissimus muscle area (LMA).
A higher inclusion of concentrate (80%) generated a total weight gain of 115.86 kg, which was twice as high as that obtained from animals fed a diet containing less concentrate (55.15 kg). The highest weight gain was observed in the animals fed with 80% concentrate; this was due to the fact that the feed had a higher energy content than the other diets (Paul, 2011; Lambertz et al., 2014).
The carcass weights in the present study can be justified by the linear growth of the slaughter weight of the animals (Ulutas et al., 2021). In the present study, the cold carcass weight ranged from 124 kg to 159 kg, a value close to that reported by Masucci et al. (2016) when evaluating dietary levels of silage in Mediterranean buffalo. The weight of the animal carcass is important because, besides demonstrating the gains obtained with the provided diet, it has a direct relation with the commercial value of the animal.
The carcass yield indicates the relationship (percentage) between the carcass weight and the body weight at slaughter, in addition to representing the edible fraction (meat) of the carcass. Diets that have a lower proportion of concentrate (i.e., higher content of neutral detergent fibre) result in a longer retention of the digesta in the gastrointestinal tract of the animal, causing a high rumen content to be present at the time of weighing, negatively interfering with the carcass yield (Cifuni et al., 2014). In addition, buffalo slaughtered with higher body weights have higher hot and cold carcass yields (Rashad et al., 2019). The averages obtained in this study for carcass yields were lower than that observed by Cabral Neto et al. (2013), which were 48.3 and 47% for hot and cold carcass yields, respectively, for Mediterranean buffalo in a feedlot.
Carcass length, carcass width, and leg length are related to the animal's bone development. In the present study, averages of 149.00, 37.68, and 72.80 cm, respectively, indicated no influence of the level of concentrate on bone development. Ulutas et al. (2021) reported an average carcass length and carcass width of Turkish Anatolian buffaloes close to that found in the present study.
Thickness of subcutaneous fat (TSF) is related to the amount of adipose tissue found in the carcass. The average TSF in the present study was within the expected minimum of 3 mm required in cattle carcasses (Gomes et al., 2021). Andrighetto et al. (2008) and Mello et al. (2018), when evaluating crossbred buffalo finished in confinement, observed average subcutaneous fat thicknesses of 6.2 and 8.1 mm, values close to those found in the current study.
As the level of concentrate increased in the diets, the slaughter weight gain and the hot carcass weight increased and, consequently, the longissimus muscle area (LMA) increased linearly. According to Rashad et al. (2019), the LMA is positively correlated to the HCW, such that an increase in the values observed in this work can be attributed to the increase in carcass weight.
The mean pH value of the meat in the present study was similar to that found by Mello et al. (2018), who found a pH of 5.68 in crossbred buffalo in a finishing system. After 24 hours, the pH of buffalo meat, according to Marrone et al. (2020) reaches between 5.71 and 5.75.
The inclusion of concentrate influenced the moisture, protein and fat of the meat linearly. The fat content is negatively correlated with moisture in the buffalo meat (Li et al., 2018). Buffalo fed a higher inclusion of concentrate produce meat that is richer in protein and fat, influenced by the higher energy intake (Naveena & Kiran, 2014). This suggests that buffalo meat is potentially more beneficial from a nutritional or human health standpoint than bovine beef from a feedlot (Giuffrida-Mendoza et al., 2015).
Regarding the physico-chemical characteristics, the similarity observed for the values of L*, a*, b*, and the cooking losses of buffalo meat may be related to the proximity in the final pH values of meat of the buffalo fed with increasing concentrate inclusions. Buffalo fed increased concentrate produced light-coloured (31.8 L* and 15.2 a*) and tender (16.0 N) buffalo meat. These results indicate a high-quality meat, of the standard of a young animal (Turan et al., 2021).
Conclusion
The addition of up to 80% concentrate increases dry matter intake, improves performance, carcass yields, and meat quality of buffalo in a feedlot.
Acknowledgements
This work was supported by the Coordination for the Improvement of Higher Education Personnel (CAPES) Master's fellowship grant; and TApUIO Agropecuária, in partnership with UFRPE.
Authors' Contributions
SAFM, DOL, GHPV, and MLMWN participated in designing the study, laboratory analysis, and manuscript writing; RASP, ALRM, AASM, and FFRC: involvement in drafting and revising the manuscript for important intellectual content; SAFM, RASP, and DMLJ: data analysis and interpretation, involvement in the preparation and revision of the manuscript; FFRC, DOL, DMLJ: contributions to the acquisition, analysis, and interpretation of data.
Conflict of interest
The authors declare that they have no conflict of interest.
References
Andrighetto, C., Jorge, A.M., Roça, R. de O., Rodrigues, É., Bianchini, W., & Francisco, C. L., 2008. Physicochemical and sensory characteristics of meat from Murrah buffaloes slaughtered in different periods of confinement. R. Bras. Zootec., 37, 2179-2184. (In Portuguese, English Abstract) https://doi.org/10.1590/S1516-35982008001200015 [ Links ]
AOAC, 2012. Official Methods of Analysis AOAC international, 19th ed. Association of Official Analytical Chemistry, Washington, DC. [ Links ]
Awan, K., Khan, S.A., Khan, M.M., & Khan, M.T., 2014. Effect of age on physico-chemical and sensorial quality of buffalo meat. Global Vet. 13, 28-32. [ Links ]
Azmi, A. F. M., Ahmad, H., Mohd Nor, N., Goh, Y.-M., Zamri-Saad, M., Abu Bakar, M.Z., Salleh, A., Abdullah, P., Jayanegara, A., & Abu Hassim, H. 2021. The Impact of Feed Supplementations on Asian Buffaloes: A Review. Animals, 11, 2033. https://doi.org/10.3390/ani11072033 [ Links ]
Brasil, Ministério Pecuária e Abastecimento. 2000. Normative Instruction No. 3 of January 17, 2000. Approval of the Technical Regulation on Stunning Methods for the Humane Slaughter of Butcher Animals. [D.O.U. 24/01/2000]. (In Portuguese, English Abstract) [ Links ]
Cabral Neto, O., Sousa, S.L.G., Camargo, A.M., Pádua, F.T., Medeiros, L.F.D., Rodrigues, L.F.D., Rodrigues, V.C. & Sousa, J.C.D. 2013. Carcass characteristics of Sindhi and Mediterranean buffaloes in confinement. Acta Tecnol. 8, 1-7. (In Portuguese, English Abstract) [ Links ]
Cifuni, G.F., Contò, M., Amici, A. & Failla, S. 2014. Physical and nutritional properties of buffalo meat finished on hay or maize silage-based diets. Anim. Sci. J. 85, 405-410. https://doi.org/10.1111/asj.12152 [ Links ]
Contò, M., Cifuni, G. F., Iacurto, M. & Failla, S. 2022. Effect of pasture and intensive feeding systems on the carcass and meat quality of buffalo. Anim Biosci. 35, 105-114. doi: 10.5713/ab.21.0141 [ Links ]
Detmann, E., & Valadares Filho, S.C. 2010. On the estimation of non-fibrous carbohydrates in feeds and diets. Arq. Bras. Med. Vet. Zootec. 62, 980-984. https://doi.org/10.1590/S0102-09352010000400030 [ Links ]
Detmann, E., Souza, M.A., Valadares Filho, S.C., Queiroz, A.C., Berchielli, T.T., Saliba, E.O.S., Cabral, L.S., Pina, D.S., Ladeira, M.M. & Azevedo, J.A.G. 2012. Methods for food analysis. INCT - Ciência Animal. 1.ed. Visconde do Rio Branco: Suprema. [ Links ]
Duckett, S. K., Klein, T. A., & Leckie, R. K. 1998. Effect of freezing on calpastatina activity and tenderness of Callipyge lamb. J. Anim. Sci. 76, 1869-1874. DOI: 10.2527/1998.7671869x [ Links ]
Giuffrida-Mendoza, M., Moreno, L. A., Huerta-Leidenz, N., Uzcátegui-Bracho, S., Valero-Leal, K., Romero, S., & Rodas-González, A. 2015. Cholesterol and fatty acid composition of longissimus thoracis from water buffalo (Bubalus bubalis) and Brahman-influenced cattle raised under savannah conditions. Meat Sci. 106, 44-49. DOI: 10.1016/j.meatsci.2015.03.024 [ Links ]
Gomes, M.N.B., Feijó, G.L.D., Duarte, M.T., Silva, L.G.P., Surita, L.M.A. and Pereira, M.W.F. 2021. Beef carcass assessment manual. 1st ed., Campo Grande, MS: Editora UFMS. [ Links ]
Hall, M. B. 2001. Calculation of non-structural carbohydrate content of feeds that contain non-protein nitrogen. Florida: University of Florida, p.A-25 (Bulletin,339). [ Links ]
Kandeepan G., & Biswas., 2007. Effect of low temperature preservation on quality and shelf life of buffalo meat. American J. Food Technol. 2, 126-135. DOI: 10.3923/ajft.2007.126.135. [ Links ]
Lambertz, C., Panprasert, P., Holtz, W., Moors, E., Jaturasitha, S., Wicke, M., & Gauly, M., 2014. Carcass characteristics and meat quality of swamp buffaloes fattened at different feeding intensities. Asian-Australas J Anim Sc. 27:551-560. doi: 10.5713/ajas.2013.13555 [ Links ]
Li, Q., Wang, Y., Tan, L., Leng, J., Lu., Q., Tian, S., Shao, S., Duan, C., Li, W., & Mao, H. 2018. Effects of age on slaughter performance and meat quality of Binlangjang male buffalo. Saudi J. Bio. Sci., 25, 248-252. https://doi.org/10.1016/j.sjbs.2017.10.001 [ Links ]
Licitra, G., Hernandez, T.M., & Van Soest, P.J. 1996. Standardization of procedures for nitrogen fractionation of ruminant feeds. Anim. Feed Sci. Technol., 57, 347-358. https://doi.org/10.1016/0377-8401(95)00837-3 [ Links ]
Marrone, R., Salzano, A., Di Francia, A., Vollano, L., Di Matteo, R., Balestrieri, A., Anastasio, A., & Barone, C. M. A. 2020. Effects of feeding and maturation system on qualitative characteristics of buffalo meat (Bubalus bubalis). Animals, 10, 899. https://doi.org/10.3390/ani10050899 [ Links ]
Masucci, F., Rosa, G., Barone, C.M.A., Napolitano, F., Grasso, F., Uzun, P., & Di Francia, A. Effect of group size and maize silage dietary levels on behaviour, health, carcass and meat quality of Mediterranean buffaloes. Animal, 10, 531-538. https://doi.org/10.1017/S1751731115002359 [ Links ]
Mello, J.L.M., Rodrigues, A.B.B., Giampietro-Ganeco, A., Ferrari, F.B., Souza, R.A., Souza, P.A., Borba, H., 2018. Characteristics of carcasses and meat from feedlot-finished buffalo and Bos indicus (Nellore) bulls. Animal Prod. Sci. 58, 1366-1374. [ Links ]
Mertens, D.R., Allen, M., Carmany, J., Clegg, J., Davidowicz, A., Drouches, M., Frank, K., Gambin, D., Garkie, M., Gildemeister, B., Jeffress, D., Jeon, C.S., Jones, D., Kaplan, D., Kim, G.N., Kobata, S., Main, D., Moua, X., Paul, B., Robertson, J., Taysom, D., Thiex, N., Williams, J., Wolf, M. 2002. Gravimetric determination of amylase-treated neutral detergent fibre in feeds with refluxing in beakers or crucibles: Collaborative study. J. AOAC Inter., 85, 1217-1240. [ Links ]
Naveena, B.M. & Kiran, M. 2014. Buffalo meat quality, composition, and processing characteristics: Contribution to the global economy and nutritional security. Animal Frontiers, 4, 18-24. https://doi.org/10.2527/af.2014-0029 [ Links ]
Paul, S.S. 2011. Nutrient requirements of buffaloes. R. Bras. Zootec., 40, 93-97. [ Links ]
Ramos, E. M., & Gomide, L. A. M. 2017. Avaliação da qualidade de carnes: fundamentos e metodologias (2nd ed). MG: Editora UFV. [ Links ]
Rashad, A. M. A., EL-Hedainy, D. K., Mahdy, A. E., Bradran, A. E., & EL-Barbary, A. S. A. 2019. Utilization of live body weight, measurements, and eye muscle components to predict carcass performance of fattened Egyptian male buffalo calves. Trop. Anim. Health Prod., 51, 2405-2412. DOI: 10.1007/s11250-019-01950-x [ Links ]
Turan, A., Yalcintan, H., Orman, A., & Ekiz, B. 2021. Effects of gender and slaughter age on meat quality of Anatolian water buffaloes. Trop. Anim. Health Prod. 53, 415. doi: 10.1007/s11250-021-02835-8. [ Links ]
Ulutaş, Z., Şahin, A., Aksoy, Y., & Uğurlutepe, E. 2021. Determination of slaughter and carcass traits in male Turkish Anatolian buffaloes at different slaughter weights. Turk J. Vet. Anim. Sci., 45, 168-175. doi:10.3906/vet-1911-15 [ Links ]
Van Soest, P.J., Robertson, J.B., & Lewis, B.A. 1991. Methods for dietary fibre, neutral detergent fibre, and non-starch polysaccharides in relation to animal nutrition. J. Dairy Sci., 74, 3583-3597. https://doi.org/10.3168/jds.S0022-0302(91)78551-2 [ Links ]
Submitted 21 March 2022
Accepted 16 August 2022
Published 11 April 2023
# Corresponding author. E-mail: juniorzootec@yahoo.com.br