Services on Demand
Article
Indicators
Related links
-
Cited by Google
-
Similars in Google
Share
South African Journal of Industrial Engineering
On-line version ISSN 2224-7890
Print version ISSN 1012-277X
S. Afr. J. Ind. Eng. vol.34 n.3 Pretoria Nov. 2023
http://dx.doi.org/10.7166/34-3-2959
SPECIAL EDITION
A puzzle of grazing management tools in the industrial engineering knowledge areas
H. Nel*; R. Coetzee; M. Mangaroo-Pillay
School of Industrial Engineering, North-West University, Potchefstroom, South Africa
ABSTRACT
Animal feed is the biggest variable cost that a farmer must manage in cattle production. Thus farmers need to maximise profitability by increasing the amount of locally grown forage that is transformed into animal output. Grazing management must be viewed as a collection of dynamic decisions that lead the farm towards its production goals. This study explored the available literature on grazing management tools and technologies, and categorised them according to industrial engineering (IE) bodies of knowledge (BOK) tools and technologies. A systematic literature review was conducted to retrieve the relevant literature. It was found that, although the technologies to aid grazing management exist, models still need to be developed into a fully functioning decision support system. The findings from this study provide guidance for future research on how to develop the tools and models into decision support systems.
OPSOMMING
Veevoer is die grootste veranderlike koste wat 'n boer in beesproduksie moet bestuur. Boere moet dus winsgewendheid maksimeer deur die hoeveelheid plaaslik verboude voer wat in diereproduksie omskep word, te verhoog. Weidingsbestuur moet beskou word as 'n versameling dinamiese besluite wat die boerdery na sy produksiedoelwitte lei. Hierdie studie het die beskikbare literatuur oor weidingbestuursgereedskap en -tegnologie ondersoek en dit volgens bedryfsingenieurswese (IE) kennisliggame (BOK) gereedskap en tegnologieë gekategoriseer. 'n Sistematiese literatuuroorsig is uitgevoer om die relevante literatuur te herwin. Daar is gevind dat, alhoewel die tegnologieë om weidingsbestuur te help bestaan, modelle steeds ontwikkel moet word tot 'n ten volle funksionerende besluitsteunstelsel. Die bevindinge van hierdie studie verskaf leiding vir toekomstige navorsing oor hoe om die gereedskap en modelle in besluitondersteuningstelsels te ontwikkel.
1. INTRODUCTION
Sustainable beef production has been interpreted by the Global Roundtable for Sustainable Beef as a product that can be associated with the triple bottom line theory [1]. Therefore, the product must adhere to social, environmental, and economic criteria. To deliver a sustainable product that adheres to the triple bottom line, a farm should have a management strategy that gives guidance and sets objectives for the entire farm's production goals while being socially responsible, economically viable, and environmentally sound [2].
South Africa has about 50 000 large commercial family farmers and roughly 240 000 small-holder family farmers [3]. Small-holder family farmers in South Africa usually use more traditional management methods, practices, and technologies that have been passed down from previous generations [3]. In other words, many of these small-scale farmers in South Africa do not use modern business methods and management strategies to optimise their farm's production performance.
Animal feed is the biggest variable cost that a farmer must manage in cattle production [4]. Thus farmers need to maximise profitability by increasing the amount of locally grown forage that is transformed into animal output (meat or milk) [4]. Systems based on livestock grazing should deliver a significant amount of forage with a high nutritional value in the most effective and economical manner [4]. Planning grazing rotations and allocating pasture in accordance with the herd's fodder demand can be done through regular monitoring of herbage. Grazing management must be viewed as a collection of dynamic decisions that include the temporal and spatial variation of pasture growth, which are primarily related to weather, soil nutrients, and grazing management elements [4]. This strategy calls for appropriate methods and techniques to track variations in herbage constantly, which can be time-consuming and labour-intensive [4].
The management strategy should therefore use a stocking strategy for cattle (which includes stocking rates and stocking methods) to optimise a land's forage use and animal performance (Rouquette & Aiken, Chapter 5 - Managing grazing in forage - livestock systems, 2020). A stocking strategy is an approach that integrates stocking rates, stocking methods, nutritional qualities, and climatic circumstances to meet the farm's production goals [5]. The stocking rate is the number of animals per area over a specific time [5]. If stocking rates are kept too high over time, land degradation occurs, which leads to pastures having a lower yield [6]. The pasture will decline over time until grazing is not possible. This phenomenon is called overgrazing [6]. Farmers need to maintain a balance between grazing the pastures for cattle performance and overgrazing. Cattle performance differs according to the farm's goals: it can be, for example, the milk yield of the cows, the number of calves delivered per season, or the mass of beef delivered.
A stocking strategy that improves the use of pasture and animal performance leads managers to use a flexible grazing system (Rouquette & Aiken, Chapter 5 - Managing grazing in forage - livestock systems, 2020). Flexible grazing systems are used to adjust the stocking method and stocking rate on a visual-quantity basis (Rouquette & Aiken, Chapter 5 - Managing grazing in forage - livestock systems, 2020). There are numerous stocking methods, but the two main ones in livestock pasture management are 1 ) continuous stocking, and 2) rotational stocking [7]. Continuous stocking does not restrict cattle to one pasture, and provides uninterrupted access to that pasture [5]. Rotational stocking uses numerous pastures to allow a previously grazed pasture to rest while another is grazed [5]. Rotational stocking can be subdivided into other stocking methods, such as strip stocking, mob stocking, alternate stocking, seasonal stocking, or sequence stocking [8].
There are a handful of farmers in South Africa who have moved away from traditional stocking methods (such as seasonal stocking) to more modern methods such as strip stocking and mob stocking. These farmers state that they have noticed many benefits that go beyond just animal gain per hectare. They include:
• Being able to detect sick livestock sooner [9];
• Reduced wastage, as all forage is consumed by the livestock (and not just the juicy and greener polls) [10];
• Animals having fresh, uncontaminated pasture [10];
• Diseases are reduced as parasite lifecycles are broken [10];
• Livestock dung is spread more evenly throughout the pasture [10];
• Better use of pasture [11]; and
• Decreasing the potential for soil erosion [10].
However, there is no silver bullet for stocking methods. One method is not necessarily superior to another, as it depends on the farm's specific needs, situation, and goals. If a farmer uses the correct management and stocking strategy for the farm's specific needs, it could lead to an increase in the farm's performance.
If an industrial engineering perspective is used when looking at a farm, the farm itself can be likened to a factory, manufacturer, or organisation. The cattle are seen as the raw material, the grazing system as the process, and the beef/milk at the end of the production line as the finished product. If the production line is not working as it should, the quality of the finished product (meat/milk) will not be satisfactory. The amount of finished product will also not reach the intended production target. A puzzle could show where the different pieces of agriculture fit into industrial engineering concepts. This could help to identify where industrial engineering knowledge is yet to be applied to allow future studies to improve current grazing management tools and technologies.
This study aims to explore the available grazing management tools and technologies and to categorise them according to industrial engineering (IE) bodies of knowledge (BOK) tools or technologies. This would enable future research to have a starting point for knowing which technologies were available and what could be improved. This would provide farmers with adequate decision support for grazing management and cattle production. The categorisation of the tools according to the IE BOK tools would also indicate where industrial engineers could assist when providing farmers with decision support systems. As South Africa is a water-scarce country, cattle grazing management is of great importance. This literature review makes a good contribution to defining meaningful projects for the development of decision-support models to improve grazing management.
2. RESEARCH METHODOLOGY
To achieve the aim of this study, a systematic literature review (SLR) was conducted. To examine the scopes of multiple studies and the function of the designed frameworks in each study, the SLR took the shape of a scoping SLR [12]. The approach of Albliwi et al. [13] was the foundation for the SLR method used in this investigation. Figure 1 shows the order of the steps and how they were organised into phases. The specifics of each step are as follows:
• Step 1 : Create a research purpose and/or objective - clearly explain the SLR's objective.
• Step 2: Develop a study protocol - the protocol should include the aim, inclusion criteria, exclusion criteria, databases, keywords, and quality assessment criteria.
• Step 3: Determine the criteria for relevance - explain why a resource is relevant to this study.
• Step 4: Find the literature by searching and retrieving it - use relevant scientific databases to find the literature.
• Step 5: Selection of studies - use the criteria developed in Step 3 to choose studies.
• Step 6: Quality assessment for applicable studies - evaluate each paper's quality.
• Step 7: Data extraction - gather the relevant data from the papers.
• Step 8: Analysis and synthesis of data - analyse and synthesise the data from the selected papers to reveal themes and patterns.
• Step 9: Report - summarise the findings of the review.
• Step 10: Dissemination - publication of the SLR.
The results of steps 1 to 6 are addressed in the subsections below, while steps 7 and 8 of the study's findings are detailed in section 3. Steps 9 and 10 are completed by publishing this study.
2.1. Step 1 : Develop a research purpose and/or objective
The purpose of this research was to investigate the available grazing management tools and technologies to categorise them according to IE BOK tools or technologies.
2.2. Step 2: Develop research protocol
Table 1 shows the research procedure that was created. Scopus was chosen as the database from which the literature was retrieved, as Scopus is the largest abstract and citation database of peer-reviewed literature and covers most scientific fields [14]. The study protocol includes key phrases and quality assessment to give instructions on what to look for and how to judge the quality of papers. This study used multiple key word inputs (as shown in Table 1) that related to the purpose of the study in order to have a better overview and so conduct a thorough investigation.
2.3. Step 3: Establish relevance criteria
The relevance criteria need to be precise while also allowing for the inclusion of as many articles as possible [12] [13]. The relevance criteria started with only tools and technologies as the keywords, but were expanded to give a broader view of all grazing management tools and technologies. Table 1 captures the detailed breakdown of the inclusion and exclusion criteria. Papers were included if they contained the keywords in their title, abstract, or keywords of the study. Furthermore, literature was included if it used or explained prediction models, grazing management strategies, production goals/plans and/or linear regression models.
Studies were excluded if they were not in English, if articles focused on crop production, if they focused on anything other than the cattle's or pasture's condition (for example, various studies used grazing management as a tool while measuring the effect on butterflies), and when they were focused solely on pasture health and did not include cattle condition and production.
2.4. Step 4: Search and retrieve the literature
The searching and retrieving of the literature were done by searching through Scopus. Initially the key words were searched without the inclusion of the keyword "cattle", which resulted in 2 058 articles. The search was then narrowed down by including "cattle" as a keyword, which resulted in 332 articles. The retrieval differentiation is outlined in Table 2.
2.5. Step 5: Selection of studies
The study selection criteria are outlined in the search protocol (Table 1 ) and step 3. Duplicates and non-English literature were removed, which left 268 articles. The selection process included screening through all of the articles' abstracts and evaluating whether they met the inclusion and exclusion criteria. Only 27 papers met the inclusion criteria. The immense reduction in articles from the initial search to inclusion was because some articles only focused on the management of the pastures and crop production, while others used grazing management as a strategy while measuring the effect of some experiments.
2.6. Step 6: Quality assessment for relevant studies
Following the screening process, the quality of the studies was evaluated by reading the full texts. The papers were evaluated by using the quality criteria shown in the search protocol (Table 1 ) used by Van Dinter et al. [15]. The search and retrieval process was documented in a selection process chart in Figure 2.
3. FINDINGS
Step 7 (data extraction) from the SLR is presented in this section. After narrowing down the list of publications to be included and reading the complete texts, a summary was tabulated (see Appendix A). The summaries include the following key points presented in the papers:
• The article title, year of publication, and details of author(s).
• The technologies used or described in the paper.
• The tools used or described in the paper.
• The form of decision support that the technology provides.
• The strategies or methods used (specifically, what stocking method is used in the paper).
• The recommendations that could improve the decision support tool in the future.
4. DISCUSSION
Step 8 (analysis and synthesis of findings) is presented in this section.
4.1. Distribution of studies
The breakdown of the number of publications found per year group is shown in Figure 3. The search was not limited to specific years, but the data clearly shows that interest in the topic has increased considerably since 2005; 2022 produced the highest number of results - a testimony to the increased interest in the research topic in recent years.
4.2. Strategies or methods used in the studies
It is important to analyse the stocking methods used in the papers to discern which stocking methods already have had technologies and tools developed for them, and which do not. The stocking methods are illustrated in Figure 4. Both the continuous and the rotational stocking methods have been accounted for, and models have been developed that consider both methods, and even a combination of the methods.
Figure 4 reflects the following stocking methods:
• Rotational stocking - The tools and models used for rotational stocking are more complex, as there are more variables that need to be taken into account (e.g., there is more than one pasture). Even with rotational stocking having a higher level of complexity, this was still the most favoured stocking method.
• Continuous stocking - Continuous stocking has most of the same variables as rotational stocking, but it is only for one pasture, and usually supplementary feed is needed [16].
4.3. Technologies used or described in the papers
It is important to have sufficient and accurate data to analyse with the help of decision-support systems. The technologies used in the articles collect the relevant data, which is then analysed using the tools to support farmers or researchers with cow and pasture production.
The technologies used in the papers include:
Wearable sensors (such as collars and nose bands) that provide real-time data to the farmer (such as global position system coordinates, movement, behavioural characteristics);
R software to perform statistical analysis; and
Numerous grazing models (GrazeIn, MINDY, Agricultural Policy/Environmental extender).
4.4. Tools used or described in the papers
A variety of tools were used or explained in the papers. In this paper, 'tools' are seen as a method or technique to analyse raw data, not as instruments such as hammers or saws. The findings indicated that seventeen papers used some form of predictive modelling through simulations, linear regression models, or algorithms. Five papers conducted an economic analysis and six used statistical analysis to analyse the accuracy of the technologies and prediction models that were used.
The tools used can be categorised according to the areas in the institute of industrial and systems engineering body of knowledge (IISEBoK) [17]. Figure 5 illustrates the categorisation of the tools used according to the IISEBoK in a simple puzzle format. The predictive models using linear regression models and simulations can be categorised under 'operations research' and 'analysis' (knowledge area 2), as they are used as problem-solving tools that are focused on improving efficiency. The predictive models are used to improve real or theoretical systems by predicting the outcome of possible managerial changes.
The economic analysis tools can be categorised under 'engineering economic analysis' (knowledge area 3), which is used to understand the economic viability of any potential problem's solution. Economic analysis is done by setting up budgets and calculating the rate of return, taxes, and depreciation. The sales and purchases of cattle are considered against the pasture cost to maximise the asset value of the cattle and the economic returns.
The statistical analysis tools can be categorised under 'quality and reliability engineering' (knowledge area 5), which is used to measure the quality, accuracy, and reliability of the system. Basic statistics are used to compare the actual performance of the cattle and pastures with their predicted performance.
4.5. Future recommendations from the literature
Most of the papers had some form of recommendations for the future. There were six papers that stated that the models used should be expanded to accommodate other variables, or that they were suitable to be developed into a decision support system. In addition, two papers concluded that the model used was not applicable to farmers, and was more appropriate for researchers and experiments. Therefore, the models used have not yet been developed into a fully functioning decision support system.
5. CONCLUSION
This paper explored the available grazing management tools, strategies, methods, decision criteria, principles, theories, and technologies. A puzzle was drawn to show how the technologies and tools used in grazing management and industrial engineering concepts overlap. The aim was achieved by conducting a scoping systematic literature review, using the methodology adapted from Albliwi et al. [13]. Studies were selected on the basis of a review protocol. The findings of this review were tabulated and analysed.
It was found that technologies are available that aid in decision support for grazing management, and that these technologies should be used in combination with various tools. These tools include predictive modelling, economic analysis, and statistical analysis. The tools to be used were then categorised according to the IISEBoK's areas (section 3.3). These tools use models that aim to help farmers to make more economically viable and sustainable decisions about cattle production and pasture growth. According to the outcomes of the selected literature review, six papers stated that the models were ready to be developed into a decision support system, but also needed to be expanded to accommodate other possible variables; and two papers stated that the models were not applicable to farmers. Therefore, although the technologies to aid in grazing management exist, the models still need to be developed into a fully functioning decision support system.
6. FUTURE RESEARCH
While this study focused on exploring the available literature on grazing management tools, strategies, methods, decision criteria, principles, theories and technologies, it is recommended that future studies explore how to develop the tools and models found in this study into fully functioning decision support systems. Future research should also improve the search strings used in this study in case any information might have been missed.
REFERENCES
[1] L. E. Sollenberger, G. E. Aiken, and M. O. Wallau, "Chapter 5: Managing grazing in forage - livestock systems," in Management strategies for sustainable cattle production in Southern Pastures, M. Rouquette and G. E. Aiken, Eds., Cambridge, MA: Academic Press, 2020, pp. 77-100. [ Links ]
[2] M. Rouquette and G. E. Aiken, "Chapter 1 : Introduction," in Management strategies for sustainable cattle production in Southern Pastures, M. Rouquette and G. E. Aiken, Eds., Cambridge, MA: Academic Press, 2020, pp. 1-10. [ Links ]
[3] J. A. van Niekerk, M. Mahlobogoane, and P. Tirivanhu, "The transfer of intergenerational family knowledge for sustainable commercial farming in Mpumalanga province of South Africa: Lessons for extension," South African Journal of Agricultural Extension, vol. 43, no. 1, pp. 66-77, 2015. [ Links ]
[4] J. R. Insua, S. A. Utsumi, and B. Basso, "Estimation of spatial and temporal variability of pasture growth and digestibility in grazing rotations coupling unmanned aerial vehicle (UAV) with crop simulation models," PLoS ONE, vol. 14, no. 3, pp. 1-21, 2019. [ Links ]
[5] V. G. Allen, C. Batello, E. J. Berretta, J. Hodgson, M. Kothmann, X. Li, J. Mclvor, J. Milne, C. Morris, A. Peeters, and M. Sanderson, "An international terminology for grazing lands and grazing animals," Grass and Forage Science, vol. 66, pp. 2-29, 2011. [ Links ]
[6] F. P. Costa and T. Rehman, "Unravelling the rationale of 'overgrazing' and stocking rates in the beef production systems of Central Brazil using a bi-criteria compromise programming model," Agricultural Systems, vol. 83, pp. 277-295, 2005. [ Links ]
[7] A. Sandhage-Hofmann, "Rangeland management," Elias, S. (Ed.), Reference module in earth systems and environmental sciences, Elsevier, Amsterdam, 2016, pp. 360. doi. org/10.1016/B978-0-12-409548-9.10455-5, 2 [ Links ]
[8] L. E. Sollenberger, G. E. Aiken, and M. O. Wallau, "Chapter 5: Managing grazing in forage - livestock systems," in Management strategies for sustainable cattle production in Southern Pastures, Florida, Elsevier, 2020, pp. 77-100. [ Links ]
[9] D. Hancock and J. Andrae, What is management-intensive grazing (MiG) and what can it do for my farm? The University of Georgia, 2009. [Online]. Available: http://www.caes.uga.edu/commodities/fieldcrops/forages/questions/023FAQ-grazmethods.pdf. [ Links ]
[10] D. J. Undersander, B. Albert, D. Cosgrove, D. Johnson, and P. Peterson, Pastures for profit: A guide to rotational grazing, University of Wisconsin-Extension, Madison, WI, 2002. [ Links ]
[11] D. C. Puga and M. A. Galina, "Ecological benefit of strip grazing with a solar mobile fence grazing system," South African Journal of Animal Science, vol. 34, pp. 89-91, 2004. [ Links ]
[12] Y. Xiao and M. Watson, "Guidance on conducting a systematic literature review," Journal of Planning Education and Research, vol. 39, no. 1, pp. 93-112, 2019. [ Links ]
[13] S. Albliwi, J. Antony, S. Lim, and T. van der Wiele, "Critical failure factors of Lean Six Sigma: A systematic literature review," International Journal of Quality & Reliability Management, vol. 31, no. 9, pp. 1012-1030, 2014. [ Links ]
[14] M. E. Falagas, E. I. Pitsouni, G. A. Malietzis, and G. Pappas, "Comparison of PubMed, Scopus, Web of Science, and Google Scholar: Strengths and weaknesses," The FASEB Journal, vol. 22, no. 2, pp. 338-342, 2008. [ Links ]
[15] R. van Dinter, B. Tekinerdogan, and C. Catal, "Automation of systematic literature reviews: A systematic literature review," Information and Software Technology, vol. 136, p. 106589, 2021. [ Links ]
[16] B. F. O'Neill, E. Lewis, M. O'Donovan, L. Shalloo, N. Galvin, F. J. Mulligan, T. M. Boland and R. Delagarde, "Predicting grass dry matter intake, milk yield and milk fat and protein yield of spring calving grazing dairy cows during the grazing season," Animal, vol. 7, no. 8, pp. 1379-1389, 2013. [ Links ]
[17] Institute of Industrial & Systems Engineers, Body of knowledge, Institute of Industrial & Systems Engineers, 2023. [Online]. Available: https://www.iise.org/details.aspx?id=43631. [ Links ]
[18] C. M. Costa, G. dos Santos Difante, A. W. Miyake, A. L. Gurgel, J. C. Santana, C. C. Itavo, L. C. Itavo, A. M. Dias, and M. A. Junior, "Technologies used in ruminant grazing management: An integrative review," Tropical Animal Health and Production, vol. 54, 357, 2022. [ Links ]
[19] D. J. Augustine, E. J. Raynor, S. P. Kearney, and J. D. Derner, "Can measurements of foraging behaviour predict variation in weight gains of free-ranging cattle?" Animal Production Science, vol. 62, no. 10-11, pp. 926-936, 2022. [ Links ]
[20] Q. X. Fang, R. D. Harmel, L. Ma, P. N. Bartling, J. D. Derner, J. R. Williams, and R. B. Boone, "Evaluating the APEX model for alternative cow-calf grazing management strategies in Central Texas," Agricultural Systems, vol. 195, pp. 103287, 2022. [ Links ]
[21] L. A. Coelho Ribeiro, T. Bresolin, G. J. Rosa, D. Rume Casagrande, M. D. Danes, and J. R. Dorea, "Disentangling data dependency using cross-validation strategies to evaluate prediction quality of cattle grazing activities using machine learning algorithms and wearable sensor data," Journal of Animal Science, vol. 99, no. 9, pp. 1-8, 2021. [ Links ]
[22] N. G. Seligman, E. D. Ungar, A. Perevolotsky, and Z. Henkin, "An assessment of grazing management options for Mediterranean grasslands using Noy-Meir's model of system dynamics parameterized from a long-term field trial," The Journal of Agricultural Science, vol. 156, pp. 1205-1215, 2019. [ Links ]
[23] K. E. Jablonski, R. B. Boone, and P. J. Meiman, "An agent-based model of cattle grazing toxic Geyer's larkspur," PLoS ONE, vol. 13, no. 3, 2018. [ Links ]
[24] P. L. Greenwood, D. R. Paull, J. McNally, T. Kalinowski, D. Ebert, B. Little, D. V. Smith, A. Rahman, P. Valencia, A. B. Ingham, and G. J. Bishop-Hurley, "Use of sensor-determined behaviours to develop algorithms for pasture intake by individual grazing cattle," Crop and Pasture Science, vol. 68, no. 12, pp. 1091-1099, 2017. [ Links ]
[25] M. S. Gadberry, W. Whitworth, and G. Montgomery, "Combining wavelet and linear-regression methods to model the effect of available forage on daily grazing and lying activity of mature Bos indicus cows during summer months," Animal Production Science, vol. 55, no. 5, pp. 639-647, 2014. [ Links ]
[26] M. D. Fraser, J. M. Moorby, J. E. Vale, and D. M. Evans, "Mixed grazing systems benefit both upland biodiversity and livestock production," Mixed Grazing Systems, vol. 9, no. 2, pp. 1-8, 2014. [ Links ]
[27] P. Gregorini, P. C. Beukes, A. J. Romera, G. Levy, and M. D. Hanigan, "A model of diurnal grazing patterns and herbage intake of a dairy cow, MINDY: Model description," Ecological Modelling, vol. 270, pp. 11-29, 2013. [ Links ]
[28] E. A. Laca, "New approaches and tools for grazing management," Rangeland Ecology & Management, vol. 62, no. 5, pp. 407-417, 2009. [ Links ]
[29] F. Fenger, I. A. Casey, N. M. Holden and J. Humphreys , "Access time to pasture under wet soil conditions: Effects on productivity and profitability of pasture-based dairying," Journal of Dairy Science, vol. 105, no. 5, pp. 4189-4205, 2022. [ Links ]
[30] G. Cheng, R. D. Harmel, L. Ma, J. D. Derner, D. J. Augustine, P. N. S. Bartling, Q.X. Dang, J.R. Williams, C.J. Zilverberg, R.B. Boone and Q. Yu, "Evaluation of the APEX cattle weight gain component for grazing decision-support in the Western Great Plains," Rangeland Ecology & Management, vol. 82, pp. 1-11, 2022. [ Links ]
[31] L. Hart, U. Dickhoefer, E. Paulenz, and C. Umstaetter, "Evaluation of a binary classification approach to detect herbage scarcity based on behavioral responses of grazing dairy cows," Sensors, vol. 22, pp. 968-995, 2022. [ Links ]
[32] A. G. Morales, R. E. Vibart, M. M. Li, A. Jonker, D. Pacheco, and M. D. Hanigan, "Evaluation of Molly model predictions of ruminal fermentation, nutrient digestion, and performance by dairy cows consuming ryegrass-based diets," Dairy Science, vol. 104, pp. 9676-9702, 2021. [ Links ]
[33] J. Werner, C. Umstatter, L. Leso, E. Kennedy, A. Geoghegan, L. Shalloo, M. Schick, and B. O'Brien, "Evaluation and application potential of an accelerometer-based collar device for measuring grazing behavior of dairy cows," Animal, vol. 13, no. 9, pp. 2070-2079, 2019. [ Links ]
[34] E. Ruelle, L. Shalloo, M. Wallace, and L. Delaby, "Development and evaluation of the pasture-based herd dynamic milk (PBHDM) model for dairy systems," European Journal of Agronomy, vol. 71, pp. 106-114, 2015. [ Links ]
[35] R. Teague, B. Grant, and H. H. Wang, "Assessing optimal configurations of multi-paddock grazing strategies in tallgrass prairie using a simulation model," Journal of Environmental Management, vol. 150, pp. 262-273, 2015. [ Links ]
[36] B. F. O'Neill, E. Ruelle, M. O'Donovan, L. Shalloo, F. J. Mulligan, T. M. Boland, L. Delaby, R. Delagarde, and E. Lewis, "Adaptation and evaluation of the GrazeIn model of grass dry matter intake and milk yield prediction for grazing dairy cows," Animal, vol. 8, no. 4, pp. 596-609, 2014. [ Links ]
[37] R. Delagarde, P. Faverdin, C. Baratte, and J. L. Peyraud, "GrazeIn: A model of herbage intake and milk production for grazing dairy cows. 2. Prediction of intake under rotational and continuously stocked grazing management," Grass and Forage Science, vol. 66, pp. 45-60, 2010. [ Links ]
[38] R. Delagarde, H. Valk, C. S. Mayne, A. J. Rook, A. Gonzalez-Rodriguez, C. Baratte, P. Faverdin, and J. L. Peyraud, "GrazeIn: A model of herbage intake and milk production for grazing dairy cows. 3. Simulations and external validation of the model," Grass and Forage Science, vol. 66, pp. 61-77, 2010. [ Links ]
[39] J. R. Bryanta, G. Oglea, P. R. Marshalla , C. Glasseyc , J. A. Lancasterc , S. C. Garcíad, and C. W. Holmese, "Description and evaluation of the Farmax Dairy Pro decision support model," New Zealand Journal of Agricultural Research, vol. 53, no. 1, pp. 13-28, 2010. [ Links ]
[40] R. Souza, S. Hartzell, X. Feng, A. Dantas Antonino, E. S. de Souza, R. S. Cezar Menezes, and A. Porporato, "Optimal management of cattle grazing in a seasonally dry tropical forest ecosystem under rainfall fluctuations," Journal of Hydrology, vol. 588, p. 125102, 2020. [ Links ]
[41] D. Hennessy, L. Delaby, A. van den Pol-van Dasselaar, and L. Shalloo, "Increasing grazing in dairy cow milk production systems in Europe," Sustainability, vol. 12, 2443, 2020. [ Links ]
[42] S. Mayne, J. McCaughey, and C. Ferris, "Non-seasonal, pasture-based milk production systems in Western Europe," in Encyclopaedia of dairy sciences, 3rd ed., P. L. McSweeney and J. P. McNamara, Eds, Academic Press, 2011, pp. 271-278. [ Links ]
* Corresponding author: nelherme@gmail.com
ORCID® identifiers
H. Nel: https://orcid.org/0000-0001-9861-5481
R. Coetzee: https://orcid.org/0000-0001-8900-3205
M. Mangaroo-Pillay: https://orcid.org/0000-0002-7825-7864
APPENDIX